This flash file tested by me without any error working well, you can use this flash file when your device hang on logo problem, restarting problem, security lock problem, password lock problem, pattern lock problem etc software related problem and you can use this tutorial without any box and this is free for all who know about software in mobile, impotent for flashing first must check your micro usb cable if not good then you can't flash it so check micro usb cable second check your device battery that is impotent for flashing if your device battery low so stop your device between flash so this is impotent for flash, before you flash save your data like contact, photos, videos etc because this is factory flash file so you can't save after full flash so must remember all are impotent notes.
Download Link
Gionee P2S Factory Firmware Download here
Required for flash:
- Gionee P2S device with good battery charged (do not try with low battery)
- Gionee P2S tested Firmware (Gionee_P2S_0201_T5552)
- Gionee P2S Flash tool (SP_Flash_Tool_v5.1343.01) Link HERE
- Micro usb cable (must be working well)
- Computer or Laptop (must be working usb port)
Procedure:
- First download tested firmware or flash tool from above link
- Extract it to desktop or as you like path
- Open SP_Flash_Tool_v5.1343.01 folder and choose flash_tool.exe file and open it
- Click on Scatter-loading button and choose MT6572_Android_scatter.txt file from Gionee_P2S_0201_T5552 folder
- Now click on Download button
- Press and hold Volume Up button and insert usb cable (must be working device key)
- Wait until driver install, if installed in your computer or laptop then downloading automatically in the device
- Wait until full flash (do not disconnect device)
- You are done
Gionee P2S Flash done with flash tool screenshot:
Gionee P2S Flash done with flash tool video:
No comments:
Post a Comment
Write Your Problem in the Below Comment Box