This flash file tested by me without any error working well, you can use this flash file when your device hang on logo problem, restarting problem, security lock problem, password lock problem, pattern lock problem etc software related problem and you can use this tutorial without any box and this is free for all who know about software in mobile, impotent for flashing first must check your micro usb cable if not good then you can't flash it so check micro usb cable second check your device battery that is impotent for flashing if your device battery low so stop your device between flash so this is impotent for flash, before you flash save your data like contact, photos, videos etc because this is factory flash file so you can't save after full flash so must remember all are impotent notes.
Download Link
Gionee G3 Firmware download here
Required for flash:
- Gionee G3 device with well battery charged (do not try when your battery low)
- Gionee G3 tested firmware (first check which type device example : 8GB, 512MB RAM, 1GB RAM all are firmware different)
- SP_Flash_Tool_v5.1343.01 tested flash tool you can download from here
- Micro usb cable (note : must be working well)
- Computer or Laptop (usb port must be working well)
Procedure:
- Download tested firmware from above link or flash tool
- Extract it to desktop or as you like path
- Open SP_Flash_Tool_v5.1343.01 folder and choose flash_tool.exe open this file
- Click on Scatter-loading button and choose MT6589_Android_scatter_emmc.txt file from G3_0203_T5948 folder
- Click on Download button
- Press and hold Volume Up button and Insert usb cable
- Wait until driver install in your computer or laptop, if driver install then start downloading automatically
- Wait until full flash done process
- You are done
Gionee G3 Flash done with flash tool screenshot:
Gionee G3 Flash done with flash tool video:
No comments:
Post a Comment
Write Your Problem in the Below Comment Box