Poco M3 Pro 5G Dead Solution – Easy Hardware Jumper Fix [Tested]

If your Poco M3 Pro 5G suddenly went dead and shows no signs of life, don’t panic. Many users have faced this issue, often due to a hardware-level fault. The good news? There’s a tested jumper solution that can help revive your phone.

In this article, we’ll walk you through the Poco M3 Pro 5G dead fix with a clear explanation and visual reference. Whether you're a mobile repair technician or a DIY enthusiast, this guide can save you time and effort.

🔧 Common Symptoms of a Dead Poco M3 Pro 5G

• Phone doesn’t turn on at all
• No vibration or charging indication
• USB connection not detected by PC
• Power button unresponsive

These issues usually point to a motherboard or PMIC (Power Management IC) fault.

🛠️ Hardware Jumper Solution (With Image Reference)

As shown in the image, the problem is often related to a broken or damaged connection on the motherboard. The fix involves creating a manual jumper wire between two key points on the PCB.

Steps:

1. Open the phone and carefully remove the motherboard.
2. Locate the jumper point as shown in the image above.
3. Using a fine wire, connect the jumper points highlighted in the red circle.
4. Ensure the wire is properly soldered and insulated.
5. Reassemble the phone and connect it to a charger or power source.

Fix & Image Credit by : Arshad Mobile Shop

If done correctly, the phone should now power on or at least show charging current (e.g. 5.06V / 0.5A as seen in the image).

⚠️ Caution: This is a hardware-level fix. If you’re not confident with soldering or motherboard work, it's better to consult a professional technician.

✅ Success Rate and Notes

This jumper solution has worked for many Poco M3 Pro 5G units with the same dead condition. Always double-check connections, and test with a power supply for best results.

💬 Final Thoughts

The Poco M3 Pro 5G dead issue can be frustrating, but with the right approach, it’s fixable. This jumper technique is a solid solution when software and charging tricks don’t work. We hope this guide helps you restore your phone without costly repairs.

If you’ve tried this method or have questions, feel free to drop a comment below!