How to Unlock Infinix Smart 7 HD (X6516) Using UMT SPD Tool

If you're stuck with a locked Infinix Smart 7 HD (X6516) due to a forgotten pattern, password, or FRP (Factory Reset Protection), this guide will help you unlock it using the UMT SPD Tool (Unisoc Module 0.9).

Requirements:

• UMT SPD Tool (Unisoc Module 0.9) installed on your computer.
• Compatible USB Drivers for Infinix Smart 7 HD.
• A USB cable.

Step-by-Step Guide to Unlock Infinix Smart 7 HD (X6516):

1. Removing Pattern/Password Lock (Safe Format Userdata)

1. Open UMT SPD Tool
   Launch the UMT Unisoc Module 0.9 on your computer.

2. Select Model:
   Go to the Models tab, choose "Generic by CPU", and select SC9863A (the chipset for Infinix Smart 7 HD).

3. Choose Job:
   In the Job tab, select "Safe Format Userdata". This will erase the user data without affecting the system files.

4. Execute the Command:
   Click on the "Execute" button.

5. Connect Your Phone:

   • Power off the phone.
   • Press and hold the Volume Up + Volume Down buttons simultaneously.
   • While holding the buttons, insert the USB cable to connect the phone to your computer.
     (Ensure USB drivers are properly installed on your PC for the tool to detect your phone.)

6. Wait for the Process to Complete:
   The tool will automatically format the userdata and remove the lock. Once done, disconnect your phone and power it on.

2. Removing FRP Lock (If Applicable)

If your phone is FRP-locked after a reset, follow these additional steps:

1. Turn Off the Phone:
   Power off the Infinix Smart 7 HD.

2. Select Model Again:
   Open UMT SPD Tool, go to the Models tab, choose "Generic by CPU", and select SC9863A.

3. Choose FRP Removal Option:
   In the Job tab, select "Remove FRP".

4. Execute the Command:
   Click on "Execute".

5. Reconnect the Phone:

   • Press and hold the Volume Up + Volume Down buttons.
   • Insert the USB cable while holding the buttons.

6. Wait for the Process to Complete:
   The tool will remove the FRP lock. Once the process is done, restart your phone, and the Google account lock will be bypassed.

Troubleshooting Tips:

• Phone Not Detected?
  Ensure USB drivers are correctly installed. Try changing USB ports or cables.

• Stuck During the Process?
  Disconnect the phone, restart both your PC and phone, and repeat the steps.

• FRP Still Not Removed?
  Make sure you've selected the correct CPU model (SC9863A) and try the process again.