How to Unlock OPPO F17 (2020) CPH2095 Using Unlock Tool When You Forgot Password & FRP Lock

Unlocking your OPPO F17 (2020) CPH2095, powered by the Snapdragon 870G chipset, can seem challenging, but using the Unlock Tool simplifies the process. This guide will walk you through each step of the process and provide tips for troubleshooting connection issues. Let’s dive in!

Steps to Unlock OPPO F17 (2020) CPH2095 Using Unlock Tool

Please note: Unlock Tool is a premium software, and you need to purchase it before using the features outlined in this guide.

Step 1: Open the Unlock Tool

• Download and install the Unlock Tool on your computer or laptop. Make sure you have an active license as the software is not free.
• Once installed, launch the Unlock Tool.

Step 2: Navigate to the OPPO Tab

• In the tool interface, find and click on the "OPPO" tab. This section is specifically designed for unlocking and working with OPPO devices.

Step 3: Search and Select Your Model

• In the OPPO tab, search for and select the model "OPPO F17 (2020) CPH2095 - Snapdragon 662."
• Ensure that you have selected the correct model before proceeding to avoid errors.

Step 4: Go to the "BROM | EDL" Tab

• After selecting the model, navigate to the "BROM | EDL" tab. This tab contains options for advanced operations like unlocking and flashing using Emergency Download (EDL) mode.

Step 5: Erase any SCREEN LOCK & FRP (Factory Reset Protection)

• In the BROM | EDL tab, look for and click on the option labeled "[EDL] FACTORY RESET." This will initiate the process to remove the any Screen Lock & FRP lock from your OPPO F17 (2020) CPH2095.

Step 6: Enter EDL Mode Using Test Point

• Press and hold Volume Up + Down and Insert to USB Cable to OPPO F17 (2020) CPH2095 for the EDL Mode and that called OPPO F17 (2020) CPH2095 Boot Key

Step 7: Install Qualcomm USB Driver

• Before connecting your OPPO X60 Pro to the Unlock Tool, ensure that you have installed the Qualcomm USB Drivers on your computer. This driver is essential for establishing a proper connection between the tool and your device in EDL mode.
• You can find the Qualcomm USB drivers online from trusted sources, or they may come bundled with the Unlock Tool installation package.

Step 8: Connect Your OPPO F17 (2020) CPH2095

• Once the phone is in EDL mode and the Qualcomm drivers are installed, connect your OPPO F17 to your computer using a USB cable.
• The Unlock Tool should detect your phone automatically and begin the unlocking process.

Step 9: Wait Until the Process Completes

• Once the phone is connected and the process begins, wait for the tool to complete the SCREEN LOCK & ERASE FRP process.
• This may take a few minutes. Once completed, the FRP lock will be successfully removed from your OPPO F17 (2020) CPH2095.

Troubleshooting: Phone Not Connecting to Unlock Tool

Sometimes, the phone may not connect to the Unlock Tool, and this can be due to several reasons. Here are some common causes and troubleshooting tips:

1. Faulty USB Cable or Port

• Ensure that the USB cable you are using is functional and supports data transfer (not just charging).
• Try switching to a different USB port on your computer.

2. Qualcomm USB Drivers Not Installed

• If the Qualcomm USB drivers are not installed or are outdated, the tool won’t be able to recognize the phone in EDL mode.
• Reinstall the drivers and restart your computer if necessary.

3. EDL Mode Not Entered Properly

• If the phone isn’t properly in EDL mode, the tool won’t detect it. Double-check that you are shorting the correct test points and that your phone is fully powered off before attempting to enter EDL mode.

4. Incompatible Windows Version

• Some versions of Windows (especially older ones) may have compatibility issues with the Unlock Tool or the Qualcomm drivers. Ensure you are using a compatible version, ideally Windows 10 or higher.

5. Battery Too Low

• Ensure your phone has at least 50% battery before attempting the process. A low battery can prevent the device from entering EDL mode.