Mi Flash Tool (All Versions)

If you have Mi, Poco and Xiaomi phone and there is a problem of software and bootloop in it, or you want to flash stock ROM in your phone, then "Xiaomi Flash Tool" can be of help to you. This tool is specially made for Xiaomi devices, with the help of Xiaomi Flash Tool you can reset your phone with factory firmware.

In this article, we will see what is Xiaomi Flash Tool, how it can be used, which steps should be followed to flash safely.

What is Xiaomi Flash Tool?

Xiaomi Flash Tool is an official Windows-based software that is specially used to flash firmware (Flash File) in Xiaomi, Mi and POCO smartphones. With the help of this tool, you can install stock ROM in your POCO, Xiaomi or Mi phones, which solves many problems, which are mentioned below:

• Bootloop issue
• System crash
• Software bugs
• Stuck on Mi logo
• Removing FRP (Factory Reset Protection) lock

What is required to use Xiaomi Flash Tool?

To use Xiaomi Flash Tool, you must have some things:

1. Xiaomi Flash Tool: Download from the link mentioned below.
2. Stock ROM/Firmware: The flash file should be according to your phone.
3. Windows PC: Because this tool works only on Windows OS.
4. USB Cable: Good quality USB cable which is right for data transfer.
5. Xiaomi USB Drivers: Drivers must be installed for communication between the flash tool and the phone.
6. Battery: The phone's battery should be at least 50% charged so that there are no interruptions during the flashing process.

Mi Flash Tool (All Versions)

1. Xiaomi (Mi) Flash Tool 20220507 - New
2. Xiaomi (Mi) Flash Tool 20220218
3. Xiaomi (Mi) Flash Tool 20210813
4. Xiaomi (Mi) Flash Tool 20210226
5. Xiaomi (Mi) Flash Tool 20200314
6. Xiaomi (Mi) Flash Tool 20191206
7. Xiaomi (Mi) Flash Tool 20191111
8. Xiaomi (Mi) Flash Tool 20191030
9. Xiaomi (Mi) Flash Tool 20181115
10. Xiaomi (Mi) Flash Tool 20180528

Xiaomi Mi Flash Pro (All Versions)

1. Xiaomi Mi Flash Pro 7.3.706.21 - Latest
2. Xiaomi Mi Flash Pro v7.3.608.18
3. Xiaomi Mi Flash Pro v7.3.422.16
4. Xiaomi Mi Flash Pro v7.3.224.9
5. Xiaomi Mi Flash Pro v7.3.105.7
6. Xiaomi Mi Flash Pro v6.3.318.42
7. Xiaomi Mi Flash Pro v6.3.311.41
8. Xiaomi Mi Flash Pro v5.3.1104.39
9. Xiaomi Mi Flash Pro v5.3.714.36
10. Xiaomi Mi Flash Pro v4.3.1220.29
11. Xiaomi Mi Flash Pro v4.3.1129.28
12. Xiaomi Mi Flash Pro v4.3.1108.24
13. Xiaomi Mi Flash Pro v4.3.1106.23
14. Xiaomi Mi Flash Pro v3.3.1212.88
15. Xiaomi Mi Flash Pro v3.3.1206.86
16. Xiaomi Mi Flash Pro v3.3.1112.82
17. Xiaomi Mi Flash Pro v3.3.703.67
18. Xiaomi Mi Flash Pro v3.3.627.65
19. Xiaomi Mi Flash Pro v3.3.608.62
20. Xiaomi Mi Flash Pro v3.3.518.58
21. Xiaomi Mi Flash Pro v3.3.419.57

How to use Xiaomi Flash Tool?

Step 1: First you have to download Xiaomi Tool and install it on your computer

Step 2: Download Stock Firmware

Download Flash File (Stock Firmware) according to the model of your Xiaomi device. Remember, your firmware should be correct, otherwise the phone may hang on logo and die. Extract the firmware ZIP file. To extract you will need WinRAR Software which can be downloaded from here.

Step 3: Install Xiaomi USB Drivers

If Xiaomi USB drivers are not installed in your computer or laptop, then install them first. Driver link can be downloaded here.

Step 4: Bring the phone into Fastboot Mode

1. Power off your Xiaomi phone.
2. After powering off, press the Volume Down + Power button together until the phone enters Fastboot mode.
3. After the Fastboot screen appears, connect the phone to the PC via USB cable.

Step 5: Open Flash Tool

Open Xiaomi Flash Tool, then click on the "Select" button in the tool and select the path of the firmware (Stock ROM) folder you extracted earlier.

Step 6: Start Flashing Process

1. Click on the "Refresh" button in Flash Tool to make sure your phone is connected.
2. When the phone is detected, click on the "Flash" button.
3. Now the flashing process will start. This process can take 5-10 minutes, so wait.

Step 7: Flashing Complete

When the flashing process is complete, the "Success" message will appear in Flash Tool. After this, disconnect your phone from USB and reboot the phone by pressing the power button.

When to use Xiaomi Flash Tool?

Xiaomi Flash Tool is used when:

1. Your phone is not booting.
2. You have to factory reset your phone and install stock firmware.
3. The phone has been caught in a system error or crash.

Important Tips:

1. Make sure to backup: All the data on your phone will be deleted during the flashing process, so make sure to create a backup first.
2. Choose the correct firmware: Choosing the wrong firmware can brick the phone, so download the exact firmware of your model.
3. Check the battery: The battery of the phone should be at least 50% before flashing.

Topic Covered: