How to Fix DM Verity Corruption & Stuck on Fastboot Mode on Xiaomi, Redmi and POCO Devices

Introduction

DM Verity corruption is a common issue affecting various Android devices, including those from Xiaomi, Redmi and Poco. This problem can prevent your device from booting properly, causing significant inconvenience. In this article, we will guide you through a comprehensive method to fix DM Verity corruption on multiple devices, including specific models like the Redmi A2, POCO C51 and more.

Steps 1: to Solve DM Verity Corruption

• Press and hold Volume Down + Power button until Redmi A2 gone on Fastboot mode

2. Enter DM Verity Corruption Fastboot Command:

• Must Install ADB Driver in your Computer or Laptop

• 1. Type: fastboot devices and hit Enter Key
• 2. Type: fastboot oem cdms fix hit Enter Key
• 3. Type: fastboot reboot hit Enter key

"Mostly, Xiaomi devices are fixed using the above command. If using the above command causes your phone to get stuck in fastboot mode, then follow the second steps which may solve your issue."

Steps 2: to Solve DM Verity Corruption

1. Open SP Flash Tool for Redmi A2:

• SP Flash Tool is a powerful software used for flashing and formatting Android devices. Ensure you have the correct version for your Redmi A2.

2. Load the Scatter File:

• Click on the "Scatter-loading file" button and select the "MT6765_Android_scatter.txt" file. This file is essential as it contains the memory map of the device.

3. Select the Authentication File:

• Click on the "Authentication File" button and select the "auth_sv5.auth" file. This file is required for authenticating the flashing process.

4. Select Firmware Upgrade:

• In the SP Flash Tool, choose the "Firmware Upgrade" option to ensure that the firmware is upgraded correctly without causing data loss.

5. Use MTK Auth Bypass Tool:

• Open the MTK Auth Bypass Tool and click "Disable auth." Turn off your phone by pressing and holding the Volume Down and Power buttons. Connect your phone to the MTK Auth Bypass Tool, which will bypass the MediaTek USB driver authentication.

6. Download with SP Flash Tool:

• After bypassing the MediaTek USB Driver, go back to the SP Flash Tool and click on "Download." Wait until the phone is formatted. If any errors occur, troubleshoot as necessary.

7. Unplug the Device:

• Once the formatting is complete, unplug your device from the computer.

8. Use UMT MTK Tool:

• Open the UMT MTK Tool, go to the "Flash" tab, and click on the Scatter loading button. Select the "MT6765_Android_scatter.txt" file again.

9. Write Flash:

• Click on the "Write Flash" button in the UMT MTK Tool.

10. Reboot the Device:

• Press and hold the Volume Up and Power buttons until the Redmi A2 reboots. The phone will automatically connect with the UMT MTK Flash Tool.

11. Wait for Completion:

• Wait until the flashing process is completed.

12. Process Completed:

• Your phone should now be free from DM Verity corruption and function normally.