How to Unlock FRP Lock on Samsung Galaxy M11 (SM-M115F) without Box

Unlocking the FRP (Factory Reset Protection) lock on your Samsung Galaxy M11 (SM-M115F) can be a daunting task, but with the right tools and steps, it can be done without the need for a professional service box. Follow this comprehensive guide to unlock the FRP lock on your Samsung Galaxy M11 using the provided procedure.

Prerequisites

Before you begin, ensure you have the following:

• Samsung Galaxy M11 (SM-M115F) with Good Charge Battery
• SAMSUNG FRP Unlock Tool
• Qualcomm USB Driver
• Micro USB Cable
• Computer or Laptop

Step-by-Step Guide

Step 1: Download and Open Samsung M11 FRP Tool

• Download the Samsung M11 FRP Tool from a trusted source and install it on your Windows PC.
• Once installed, open the Samsung M11 FRP Tool.

Step 2: Scan and Select COM Port

• In the Samsung M11 FRP Tool, click on the "Scan Ports" button.
• A list of available COM ports will appear. Select "COM57" from the list. If "COM57" is not listed, ensure your device is connected properly and try scanning again.

Step 3: Select the MBN File

• Click on the "Select MBN File" button in the tool.
• Navigate to the location where you have saved the SM-M115F_loader_8953.mbn file.
• Select the SM-M115F_loader_8953.mbn file and click "Open."

Step 4: Put Your Phone in EDL Mode

• Power off your Samsung Galaxy M11.
• To put your phone in EDL (Emergency Download) mode, use the EDL Test Point method. Refer to the EDL Test Point photo for Samsung Galaxy M11 to locate the test points on the motherboard.
• Use a conductive tool (like tweezers) to short the test points while connecting the phone to the PC via the USB cable.
• Your phone should now be in EDL mode. The tool should recognize the device and display it in the COM port list.

Step 5: Start the FRP Removal Process

• In the Samsung M11 FRP Tool, click on the "Start FRP Remove" button.
• The tool will begin the FRP removal process. This may take a few minutes, so be patient and do not disconnect the phone.
• Once the process is completed, you will see a success message in the tool.

Step 6: Reboot Your Phone

• Disconnect your Samsung Galaxy M11 from the PC.
• Power on the device. The FRP lock should now be removed.
• Proceed with the initial setup of your phone without any FRP lock hindrance.

Conclusion

By following these steps, you can successfully unlock the FRP lock on your Samsung Galaxy M11 (SM-M115F) without the need for a professional service box. Always ensure you are using the correct files and tools to avoid any potential issues. If you encounter any problems, double-check each step and ensure your device is properly connected and in the correct mode.

Unlocking your device's FRP lock will allow you to regain full access to your phone, making it easier to set up and use as desired.