How to Unlock Infinix Smart 4 Plus (X680D) Frp Unlock with SP Flash Tool | Free Want to more locks Bypass like Pattern Lock, Google Lock don't worry you can easy done using this guide cause tested by me without any risk.
If your device in hard ware issue like shorting then can be risky please be carefully use who follow, this method for pattern unlock, must be have required files these are in below links without that you can't do this to reset lock, this is for free every one can use without any boxes must read below description.
This method can be used without any box its done from flash tool it's also available here, and it is important to installing phones driver, you can't flash or upgrade if it is not installed on your computer or laptop it must be installed and also available in this post, here all are linked that tested and working fine just in one try
Infinix Smart 4 Plus (X680D) Frp Unlock Using SP Flash Tool can try to repair it by. have to charge a battery with any charger and charged it by 80%.
Requisite
- Infinix Smart 4 Plus (X680D) with Good battery charged do not try with low battery
- MCT MediaTek USB Driver (libusb win32 devel filter 1.2.6.0)
- Infinix Smart 4 Plus (X680D) Frp Reset code
- Infinix Smart 4 Plus (X680D) SP Flash Tool
- Infinix Smart 4 Plus (X680D) USB Driver (MediaTek USB Driver)
- Micro USB Cable with Good quality
Procedure
- Download all are files from the above links if link not working just leave your comment on below comment box
- Install WinRAR software in your computer or laptop for extract downloaded links
- Extract all file and paste to desktop
- First Install libusb win32 devel filter 1.2.6.0 and MediaTek USB Driver and after that Reboot (Restart) Computer
- Open MCT MediaTek USB Driver Tool Click on BYPASS
- Turn OFF Phone Press and hold Volume Up + Down and Insert USB Cable
- Wait Until Completed
- When Done Disable Protection You can See like Below image
- Open SP flash tool click on Scatter-loading choose button and select MT6765_Android_scatter.txt file
- Click on Download-Agent and Select MTK_AllInOne_DA_mt6765_mt6785.bin File from Flash Tool Folder
- Click on Authentication File and Select auth_sv5.auth File from Flash Tool Folder
- Go to Option ► Connection and Set Com Port (COM:3) and Baud Rate (921600)
- Now Open Device Manager and Check Your Phone Com Port (Check below Image for more Information)
- Now go to Format Tab and click to Manual Format flash
- Copy 0x1888000 code and paste to Begin Address[HEX]
- Copy 0x100000 code and paste to Format Length[HEX]
- Click on Start button
- Wait Until Completed
No comments:
Post a Comment
Write Your Problem in the Below Comment Box