If you are locked out of your Vivo Y81 (1803) due to a forgotten pattern or FRP lock, don't worry. This guide will help you bypass these locks using SP Flash Tool. Follow the steps carefully to ensure a successful bypass.
Requirements
- VIVO Y81 ( 1803 ) with good charge battery
- VIVO Y81 ( 1803 ) Pattern and Frp Lock Remove File
- VIVO Y81 ( 1803 ) Flash tool
- VIVO Y81 ( 1803 ) USB Driver
- Micro USB Cable
- Computer or Laptop
Step-by-Step Procedure
Step 1: Download Required Files
- Download all the necessary files from the provided link and save them to a convenient location on your computer.
Step 2: Extract Files
- Extract all downloaded files to any path on your computer. Ensure you remember the location of the extracted files for later use.
Step 3: Install MediaTek USB Driver
- Install the MediaTek USB Driver on your computer or laptop. This driver is essential for your computer to communicate with the Vivo Y81.
Step 4: Open SP Flash Tool
- Launch the SP Flash Tool application from the extracted files.
Step 5: Load Download Agent
- In the SP Flash Tool, click on the "Download Agent" button. Navigate to the Flash Tool folder and select the appropriate file.
Step 6: Load Authentication File
- Click on the "Authentication" button and choose the file from the Flash Tool folder.
Step 7: Load Scatter File
- Click on the "Scatter-loading" button and select the scatter file from the Pattern and FRP Lock folder.
Step 8: Begin Download Process
- Click on the "Download" button in SP Flash Tool.
Step 9: Connect Your Phone
- Insert the USB cable into your phone and connect it to the computer. Wait until the process is completed.
Step 10: Bypass Pattern Lock
- If the phone asks for an email ID or password after the previous steps, proceed with the following steps to bypass the FRP lock.
Step 11: Reopen SP Flash Tool
- Open SP Flash Tool again if it was closed.
Step 12: Navigate to Format Tab
- Go to the "Format" tab in SP Flash Tool.
Step 13: Manual Format Flash
- Click on "Manual Format Flash."
Step 14: Input FRP Code
- Open the "Frp code.txt" file from the Pattern and FRP Lock folder. Copy the codes one by one and paste them into the respective boxes in SP Flash Tool.
Step 15: Start Format Process
- Click on the "Start" button in SP Flash Tool.
Step 16: Connect Your Phone
- Insert the USB cable into your phone and connect it to the computer again. Wait until the process is completed.
By following these steps, you should be able to bypass the pattern and FRP lock on your Vivo Y81 (1803) using SP Flash Tool. If you encounter any issues, ensure all drivers are correctly installed and the correct files are selected at each step.
Note : More Information check below video tutorial
Full Tutorial in video
No comments:
Post a Comment
Write Your Problem in the Below Comment Box