Flashing your ASUS ZENFONE MAX PRO M2 (ZB631KL) can help you fix software issues, update your device to the latest firmware, or revert to a stock ROM. This process involves using Fastboot mode, which is a protocol used to re-flash partitions on your device. Here's a step-by-step guide on how to flash your ASUS ZENFONE MAX PRO M2 in Fastboot mode.
Prerequisites
Before you start, ensure you have the following:
- ASUS ZENFONE MAX PRO M2 (ZB631KL).
- USB Cable to connect your phone to your PC.
- PC with ADB and Fastboot tools installed.
- Latest firmware for ASUS ZENFONE MAX PRO M2
- Battery charged to at least 50% to avoid any interruptions during the process.
Step-by-Step Guide
Step 1: Backup Your Data
Flashing your device will erase all the data on it. Make sure to back up important files, contacts, and any other data you want to keep.
Step 2: Install ADB and Fastboot Tools
- Download the ADB and Fastboot tools from ASUS ZENFONE MAX PRO M2 Fastboot Mode Driver Website.
- Extract the downloaded zip file to a location on your PC.
- Add the extracted folder to your system's PATH to use ADB and Fastboot commands from any directory.
Step 3: Download the Firmware
- Download from this ASUS ZENFONE MAX PRO M2 Fastboot Mode ROM | Mirror link. It's tested by me and I use it for flashing.
Step 4: Prepare Your Device
- Power off your device.
- Boot into Fastboot mode by pressing and holding the Volume Up and Power buttons simultaneously until the Fastboot screen appears.
Step 5: Connect Your Device to PC
- Connect your ASUS ZENFONE MAX PRO M2 to your PC using the USB cable.
Step 6: Flash the Firmware
- Extract the downloaded firmware file. You should see various flashall_AFT.cmd bat file.
- Double Click on it and wait until completed
Step 7: Reboot Your Device
- Once the flashing process is complete, reboot your device automatically:
- Your ASUS ZENFONE MAX PRO M2 will restart, and you should see the stock firmware running on your device.
Troubleshooting
- Device not detected: Ensure USB drivers are installed, and USB Debugging is enabled.
- Flashing errors: Double-check the firmware files and their respective commands.
- Boot loop: If your device gets stuck in a boot loop, try performing a factory reset from the recovery mode.
Conclusion
Flashing your ASUS ZENFONE MAX PRO M2 in Fastboot mode can be a straightforward process if you follow the steps carefully. This method is particularly useful for resolving software issues, updating firmware, or reverting to stock ROM. Always ensure to back up your data before proceeding and download the correct firmware for your specific device model.
By following this guide, you can successfully flash your ASUS ZENFONE MAX PRO M2 and enjoy a refreshed and stable Android experience.
Full Tutorial in video
No comments:
Post a Comment
Write Your Problem in the Below Comment Box