Removing the pattern lock and FRP (Factory Reset Protection) lock on your Vivo Y93 can be a straightforward process if you follow the steps carefully. This guide will help you unlock your device using a free flash tool. Before you begin, ensure that you have installed the necessary drivers and have a USB cable ready.
Prerequisites
- Vivo Y93 Phone with good charge battery
- Vivo Y93 Format tool
- Micro USB cable
- Computer or Laptop
- Install MediaTek VCOM & ADB Drivers: Ensure that MediaTek VCOM and ADB drivers are installed on your computer. If you have already installed these drivers, you can skip this step. Otherwise, you can find and install these drivers from trusted sources online.
Step-by-Step Procedure
Step 1: Turn Off Your Vivo Y93
- Press and hold the Power button until the power menu appears.
- Select "Power off" and wait for the device to completely turn off.
Step 2: Boot into Recovery Mode
- Press and hold the Volume Up + Power button simultaneously until the recovery menu appears on the screen.
- Use the Volume Down button to navigate to the "Recovery" option.
- Press the Power button to confirm your selection.
Step 3: Navigate to Advanced Options
- In the recovery menu, use the Volume Down button to select "Advanced option."
- Press the Power button to confirm.
Step 4: Reboot with ADB
- In the advanced options menu, use the Volume Down button to select "Reboot with ADB."
- Press the Power button to confirm.
- Connect your phone to your computer using a USB cable and wait for the device to boot up normally.
Step 5: Open Device Manager
- On your computer, press Windows Key + R to open the Run dialog box.
- Type devmgmt.msc and press Enter to open Device Manager.
- In Device Manager, expand the "Ports (COM & LPT)" section. You should see an entry like "MediaTek Preloader USB VCOM Port (COM16)" or similar.
Step 6: Open Vivo Y93 Format Tool
- Launch the Vivo Y93 Format tool on your computer.
- In the tool, locate the COM port number that corresponds to your device as shown in Device Manager (e.g., COM16).
- Enter the COM port number in the format tool.
- Click the "btn2" button in the format tool and wait for the process to complete.
Step 7: Wait for Automatic Reboot
- The format tool will communicate with your device and remove the pattern lock and FRP lock.
- Your Vivo Y93 will automatically reboot once the process is complete.
Step 8: Verify the Unlock
- After your device reboots, it should no longer prompt for the pattern lock or be stuck in FRP lock.
- Set up your device as new, and you're good to go!
Vivo Y93 Pattern Lock & Frp Lock Remove
No comments:
Post a Comment
Write Your Problem in the Below Comment Box