Samsung J8 (J810G) you can easily solve any problem with this method if you are fresher technician or experienced technician in android software related if the error occurs of USB not recognized then your USB is not working.if a battery is not charged,your USB socket will not proper work and you will fail in this method. if any issues please write your questions in the comment box I will try my best to help you. This method can be used without any box its done from flash tool it's also available here, and it is important to installing phones driver, you can't flash or upgrade if it is not installed on your computer or laptop it must be installed and also available in this post, here all are linked that tested and working fine just in one try
Samsung J8 (J810G) want to repair this device, can try to repair it by self . have to charge a battery with any charger and charged it by 90%. Your data is very important for so it is good to do a backup of data it may consist of contact details, important messages, emails or any other important thing which feel to be the backup in a device. This backup can be done on another device. we have to do the backup because after a format of a device, all data will be gone and it will not be recovered. For backup in other devices, you can use another external device like hard drive, SD card or any other suitable devices. If are doing by own. do it at your own risk as we don't take any responsibility if a device is damaged
Required
- Samsung J8 (J810G) device with good battery charged do not try with low battery
- Samsung J8 (J810G) flash file
- Samsung J8 (J810G) USB Driver
- Samsung J8 (J810G) Flash tool
- Micro USB cable with good quality
- Computer or Laptop
Procedure
- Download tested firmware or Odin flash tool from above link
- Extract to both files to desktop or as you like path ( must be installed winrar software in your computer or laptop)
- Open Odin3_v3.13.1 folder and choose Odin3_v3.13.1.exe file
- Click on BL button and choose BL_J810GDDU2ARJ4_CL14567479_QB20204636_REV00_user_low_ship_MULTI_CERT.tar.md5 file
- Click on AP button and choose AP_J810GDDU2ARJ4_CL14567479_QB20204636_REV00_user_low_ship_MULTI_CERT_meta.tar.md5 file
- Click on CP button and choose CP_J810GDDU2ARJ5_REV00_CL950565__QB_11094940.tar.md5 file
- Click on CSC button and choose CSC_OMC_ODM_J810GODM2ARK1_CL14567479_QB20476129_REV00_user_low_ship_MULTI_CERT.tar.md5 file
- Turn Off device (if your device ON)
- Press and hold Volume Up + Volume Down and Insert USB Cable to Phone
- After that you can see warning Press Volume Up button for continue for Download Mode
- Click on Start button
- Wait until full installed Android system (note : do not try unplug when your device in download mode)
- Congratulation you are done
Screenshot :
Note : If any problem using this guide just leave your comment on below comment box I will soon fix it if possible
No comments:
Post a Comment
Write Your Problem in the Below Comment Box