If you want to remove a Google account from a Redmi Go device, you can attempt to do it yourself by following these steps. Ensure the battery is charged to at least 95% using any charger available. Since your data is crucial, it is advisable to perform a backup, including contact details, important messages, emails, or any other essential information that you wish to preserve on the device. This backup can be created on another device, such as a hard drive, SD card, or any other suitable external device. It's important to note that after formatting the device, all data will be lost and cannot be recovered.
This method does not require any special box; it can be executed using a flash tool, which is also provided here. Make sure to install the necessary phone drivers on your computer or laptop, as flashing or upgrading won't be possible without them. All required links are available in this post, and they have been tested to ensure they work seamlessly in one attempt.
For Redmi Go (tiare), you can easily remove Google account (FRP unlock) using this method, whether you are a novice or experienced technician in Android software. If you encounter the 'USB not recognized' error, check if your USB is functioning correctly. If the battery is not charged adequately, the USB socket may not work correctly, leading to method failure. If you face any issues, please write your questions in the comment box, and I will do my best to assist you. Keep in mind that performing these actions is at your own risk, as we do not take responsibility for any damage to the device.
Download
Redmi Go (tiare) frp unlock file
Redmi Go (tiare) USB Driver
Redmi Go (tiare) Flash File
Required :
- Redmi Go (tiare) Phone with good charge battery (note : do not try with low battery)
- Redmi Go (tiare) frp unlock file
- Mi Flash tool
- Computer or Laptop
- Redmi Go (tiare) USB Driver
- Micro USB Cable (Date cable)
Procedure :
- Download all are files with required for frp unlock from the above link (note : if link dead or other issue just write down comment on below comment box i will soon fix it if possbile
- Extract all are file to desktop
- Install Mi Flash tool if not installed in your computer or laptop (already installed in your computer then skip this step)
- Open XiaoMiFlash.exe file from the C:\XiaoMi\XiaoMiFlash path
- Click on "Select" button and choose "tiare_redmi-go_FRP" folder
- Connect phone in EDL Mode using below image
 |
| Credit : Firmware27 |
- Must Install Qulcomm USB Driver in your computer if not install then follow below video
- Click on "refresh" button in Mi Flash tool after that you can see like "COM:10"
- Click on "flash" button and wait until completed
No comments:
Post a Comment
Write Your Problem in the Below Comment Box