Factory Reset Protection (FRP) is a security feature on Android devices to prevent unauthorized access after a factory reset. However, it can be inconvenient if you forget your Google account credentials. Here’s a step-by-step guide to remove the FRP lock on your Lava Z60s using the SP Flash Tool.
Prerequisites:
- MediaTek USB Driver: Necessary for your computer to recognize your device.
- SP Flash Tool: The software used to flash your device.
- MT6739_Android_scatter.txt file: The scatter file specific to Lava Z60s.
Ensure you download these files from reliable sources. If you encounter any issues with the download links, leave a comment below.
Steps to Remove FRP Lock
Step 1: Download and Extract Files
- Download all the required files.
- Install WinRAR software on your computer to extract the downloaded files.
- Extract all files and paste them on your desktop for easy access.
Step 2: Install MediaTek USB Driver
- Install the MediaTek USB Driver on your computer.
- Restart your computer to ensure the drivers are properly installed.
Step 3: Configure SP Flash Tool
- Open SP Flash Tool.
- Click on the “Scatter-loading” button.
- Navigate to the location where you extracted the files and select the MT6739_Android_scatter.txt file.
Step 4: Format the FRP Partition
- Go to the “Format” tab in SP Flash Tool.
- Select “Manual Format Flash”.
- Copy 0x2d88000 and paste it into the “Begin Address [HEX]” field.
- Copy 0x100000 and paste it into the “Format Length [HEX]” field.
- Click on the “Start” button.
Step 5: Connect Your Phone
- Insert the USB cable into your phone with the battery in place.
- Your phone should be automatically detected by the SP Flash Tool.
- Wait for the process to complete. This may take a few minutes.
Step 6: Reboot Your Phone
- Once the process is complete, disconnect your phone from the USB cable.
- Reboot your phone. The FRP lock should now be removed.
How to Fix DL Image Fail on Lava Z60s Using SP Flash Tool
If you encounter a “DL Image Fail” error during the process, follow these steps:
- Open SP Flash Tool.
- Click on the “Scatter-loading” button and select the MT6739_Android_scatter.txt file.
- Click on the “Download” button.
- Connect your phone to your computer via USB cable.
- Wait for the process to complete.
Download Links
Conclusion
Removing the FRP lock on your Lava Z60s using SP Flash Tool is straightforward if you follow these steps carefully. Ensure you have all the necessary files and drivers installed, and don't hesitate to ask for help in the comments if you encounter any issues. With these steps, you should be able to regain access to your device without any hassle.
If you found this guide helpful, please share it with others who might need it.
No comments:
Post a Comment
Write Your Problem in the Below Comment Box