How to Flash Lava Z60s with Flash tool

Experiencing software issues on your Lava Z60s? Follow this step-by-step guide to resolve common software problems using the SPMultiPortFlashDownloadProject tool.

Step 1: Preparation

Download Required Files: Ensure you have all the necessary files for the process. If any download links are broken, leave a comment below for assistance.
Install WinRAR: Download and install WinRAR software on your computer or laptop to extract the downloaded files.
Extract Files: Extract all downloaded files and paste them onto your desktop for easy access.

Step 2: Install Lenovo USB Drivers

Install Drivers: Navigate to the Lenovo USB Driver installer and complete the installation process.

Restart Your Computer: After installing the drivers, reboot your computer to ensure the drivers are properly configured.

Step 3: Setup SPMultiPortFlashDownloadProject

Open the Tool: Launch the SPMultiPortFlashDownloadProject.exe file from the extracted folder.

Load Download Agent File:

Go to the File menu and select Open Download Agent File.
Choose the MTK_AllInOne_DA.bin file located in the flash tool folder.

Step 4: Load Scatter File

Select Scatter File:

Click on the Scatter File button.
Navigate to the Lava Z60S Firmware folder and select the MT6739_Android_scatter.txt file.

Step 5: Configure Flash Tool

Select Options:

Tick the BootROM+Preloader COM Sel All option.

Scan for Device:

Click on the Scan button.
Insert the USB cable into the Lava Z60s. The flash tool will automatically detect the COM port.
Once detected, disconnect the phone from the USB.

Step 6: Start the Flashing Process

Configure Flashing Options:

Untick all options except for the detected COM port.

Initiate Flashing:

Click on the Start All button.
Reconnect the USB cable to the device.
Note: If the phone is not detected the second time, remove the battery, reinsert it, and then connect the phone again.

Step 7: Wait for Completion

Completion: Wait until the flashing process is completed. This may take several minutes, so be patient.
Disconnect Device: Once the process is finished, disconnect your Lava Z60s from the USB cable.

By following these steps, you should be able to resolve most software issues on your Lava Z60s. If you encounter any problems or have questions, feel free to leave a comment below.

Download Links