Bricking your Vivo V7 can be a frustrating experience, especially if you're unsure how to fix it. Fortunately, there are ways to unbrick your device and bring it back to life. This guide will walk you through the steps to unbrick your Vivo V7, ensuring that you can restore it to its normal working condition.
What Does "Bricked" Mean?
When a device is "bricked," it means it is no longer functioning properly and cannot boot up. There are two types of bricking:
- Soft Brick: The device is stuck in a boot loop or stuck on the logo screen. This type of brick can often be fixed with software solutions.
- Hard Brick: The device shows no signs of life. This type is more challenging to fix and might require professional assistance.
PD1718F_EX_A_3.13.7
PD1718F_EX_A_3.10.0
PD1718F_EX_A_3.7.8_vivo_qcom_LA.UM.6.6.r1-03400-89xx.0_msm8953
Vivo+V7+PD1718F_EX_A_1.9.7
Requirements
Before starting the unbricking process, make sure you have the following:- A PC or laptop
- A USB cable
- Vivo V7 firmware file
- Qualcomm USB drivers
- QFIL (Qualcomm Flash Image Loader) tool
Steps to Unbrick Vivo V7
Step 1: Download and Install Necessary Tools
- Download Qualcomm USB Drivers: You can find these drivers online. Install them on your PC to ensure your device is recognized.
- Download QFIL Tool: QFIL (Qualcomm Flash Image Loader) is essential for flashing the firmware onto your Vivo V7.
- Download Vivo V7 Firmware: Ensure you download the correct firmware for your Vivo V7 model.
Step 2: Install Qualcomm USB Drivers
- Extract the downloaded Qualcomm USB drivers.
- Run the setup file and follow the on-screen instructions to install the drivers.
- Restart your PC to ensure the drivers are properly installed.
How to Update USB Driver
Step 3: Prepare Your Vivo V7
- Power off your Vivo V7 completely.
- Open the back cover of the phone.
- Refer to the image below for the Test Point location.
- Use a conductive tool to touch the two Test Points.
- While holding the Test Points, insert the USB cable.
- The phone should now enter EDL mode.
Step 5: Load the Firmware in QFIL
- In QFIL, select the "Flat Build" option.
- Click on the "Browse" button next to the "Programmer Path" field.
- Navigate to the folder where you extracted the Vivo V7 firmware and select the "prog_emmc_firehose_8953_ddr.mbn" file.
- Click on the "Load XML" button and select the "rawprogram_unsparse.xml" and "patch0.xml" files from the firmware folder.
Step 6: Flash the Firmware
- Ensure your Vivo V7 is still connected to the PC.
- Click on the "Download" button in QFIL to start the flashing process.
- Wait for the process to complete. It may take several minutes.
- Once the process is complete, you will see a success message in QFIL.
Step 7: Reboot Your Vivo V7
- Disconnect your Vivo V7 from the PC.
- Press and hold the Power button to turn on your device.
- Your Vivo V7 should now boot up normally.
Video Tutorial Vivo V7 flashing
Conclusion
Unbricking your Vivo V7 might seem daunting, but with the right tools and steps, it's entirely doable. This guide provides a comprehensive approach to restore your device to working condition. Remember to always download firmware and tools from trusted sources to avoid further issues. If you encounter any problems during the process, consider seeking professional assistance.
No comments:
Post a Comment
Write Your Problem in the Below Comment Box