Fix Touch Problem in Xiaomi Redmi Y1 (MDI6S) after Update

Common Issues Resolved

• Virus Removal
• Pattern Lock and Phone Lock
• Hard Reset and Format
• Flashing and Firmware Updates
• Solving Hang on Logo and Boot Loop Problems
• Resolving 'Unfortunately App Has Stopped' Errors
• Fixing Auto Turn-On Issues with Internet and WiFi
• Addressing Automatic App Installations and Balance Deductions

Important Precautions

1. Micro USB Cable: Ensure that your micro USB cable is in good condition. A faulty cable can disrupt the flashing process.
2. Battery Charge: The device battery should be sufficiently charged (at least 85%) to prevent interruptions during the flashing process.
3. Data Backup: Backup all important data such as contacts, photos, videos, and other essential files before proceeding, as flashing will erase all data on the device.

Backup Methods

• External Devices: Use an external device like a hard drive or SD card to save your data.
• Alternate Devices: Backup data to another smartphone or computer.

Flashing Process

1. Check USB and Battery: Verify the quality of the USB cable and ensure the battery is charged.
2. Install Drivers: Install the necessary phone drivers on your computer or laptop. Without the drivers, you won’t be able to flash or update the device.
3. Follow Instructions: Use the provided flash tool and follow the step-by-step instructions carefully.

Troubleshooting

• USB Not Recognized: If you encounter a "USB not recognized" error, the issue might be with the USB cable or socket.
• Battery Issues: Ensure the battery is charged and the USB socket is functioning correctly.

Requisite for Xiaomi Redmi Y1 (MDI6S)

• Xiaomi Redmi Y1 (MDI6S) device with good battery charged, do not try with low battery
• Xiaomi Redmi Y1 (MDI6S) Stock ROM Firmware
• Xiaomi Redmi Y1 (MDI6S) Flash Tool
• Xiaomi Redmi Y1 (MDI6S) USB Driver (for Flashing)
• Micro USB Cable with good quality
• Computer or Laptop

Procedure Xiaomi Redmi Y1 (MDI6S)

• Download tested ROM or Flash tool from above link (if link not working then write down comment on below comment box)
• Go to Firmware WinRAR and please rename to .tgz, if is .gz or tar
• Extract to desktop both WinRAR (Note : Must your firmware folder in desktop OR C Drive)
• Must be unlock boatloaer for flashing
• Open C:\XiaoMi\XiaoMiFlash\ and choose XiaoMiFlash.exe file and open it
• Click on Select button and choose ugg_global_images_V9.1.2.0.NDKMIEI_20171122.0000.00_7.1_global_d8438062ed folder from the desktop extracted 
• Choose "clean all and lock" on flash tool option in below see below image (Note : Can't remove Mi account in this phone)
• Note: Clean All, Save User data options will not work in EDL Mode. If you want to save internal User Data, follow this:
• Open the ROM folder and find Rawprogram0.xml and edit it with Notepad++

• Remove/delete the line and save the file.

Credit : Muz_paray

• Open behind cover and check below image Test Point
• Touch to two point from the extractor phone and Insert USB cable then it will be gone on EDL Mode

• If not driver installed then Go to My Computer ➦ Properties ➦ Device Manager ➦ Update driver from above link's driver (check below video)

• Now click on Refresh button in XiaoMiFlash Tool, after you can see COM:10 or other on flash tool
• Tick on clean all and lock (Note : you can't remove only mi account in this device)
• Click on Flash button and wait until finished the process, do not try to unplug while device in flashing mode
• Congratulation you are done