How to Flash & Unbrick Xiaomi Mi A2 | EDL Test Point Guide

Flashing your Xiaomi Mi A2 can help resolve various issues like bootloops, software crashes, or even unbricking a dead phone. This guide will walk you through the process of flashing the Xiaomi Mi A2 using the EDL Test Point method with a step-by-step procedure. Let’s get started!

Why Flash Your Xiaomi Mi A2?

Flashing is the process of reinstalling the firmware or stock ROM on your Xiaomi Mi A2. Here are some common reasons you may need to flash your phone:

• Fixing a bricked or bootloop device.
• Removing bugs or glitches in the operating system.
• Updating to the latest firmware.
• Resolving software crashes or errors.

By using the EDL Test Point method, you can revive your phone even if it is completely unresponsive or stuck in a bootloop.

Prerequisites for Flashing Xiaomi Mi A2

Before starting the flashing process, make sure you have the following:

1. Download the Tested ROM and Flash Tool: Use the download links provided. If the links are broken, leave a comment below, and we’ll assist you.

2. WinRAR Software: Install it on your computer to extract firmware files.

3. Qualcomm USB Drivers: Ensure you install the latest USB drivers on your PC.

4. Unlocked Bootloader: Flashing requires an unlocked bootloader. If it’s locked, unlock it first.

5. Fully Charged Phone: Ensure your battery level is at least 50% to prevent interruptions.

6. A Good Quality USB Cable: To avoid connection issues.

Step-by-Step Guide to Flash Xiaomi Mi A2

Step 1: Prepare the Firmware File

1. Download the Tested ROM from the above-provided link.

2. Open the firmware file using WinRAR. If the file extension is .gz or .tar, rename it to .tgz.

3. Extract the firmware files to your Desktop or C Drive for easy access. Ensure the extracted folder is named something like: jasmine_global_images_V9.6.10.0.ODIMIFE_20180731.0000.00_8.1_2aeda83301.

Step 2: Install Xiaomi Flash Tool

1. Navigate to C:\XiaoMi\XiaoMiFlash\ on your PC.

2. Double-click on XiaoMiFlash.exe to open the tool.

3. Click the Select button in the tool and browse to the extracted firmware folder on your desktop (e.g., jasmine_global_images_V9.6.10.0).

Step 3: Choose Flashing Options

1. In the Xiaomi Flash Tool, you’ll see multiple flashing options:

• Clean All: Erases everything on the phone.
• Save User Data: Keeps your phone’s internal data (not available in EDL mode).
• Clean All and Lock: Erases everything and relocks the bootloader.

Important Note: If you want to save your internal data, follow these steps:

• Open the ROM folder and locate the file named Rawprogram0.xml.
• Right-click and open it with Notepad++.

• Delete the line related to erasing user data, then save the file.

For most cases, choose the Clean All and Lock option unless your device has a cloud lock.

Step 4: Enter EDL Mode Using Test Points

1. Remove the Back Cover: Carefully remove the back panel of your Xiaomi Mi A2 to access the motherboard.

2. Locate the Test Points: Find the two test points on the motherboard (refer to the image below for their exact location).

3. Short the Test Points: Use a pair of tweezers to short the two test points while connecting your phone to the PC via USB cable. This will put your device into EDL (Emergency Download Mode). The phone’s screen will remain blank in this mode.

Tip: If your PC doesn’t detect the device, ensure the Qualcomm USB drivers are installed and up-to-date.

Step 5: Flash the Firmware

1. Go back to the Xiaomi Flash Tool and click the Refresh button. You should see your device listed as COM:10 (or another port number).

2. Verify that you have selected the correct flashing option (Clean All and Lock or another).

3. Click on the Flash button to start the flashing process. Do not disconnect your phone or PC during this process.

4. Once the process is complete, the tool will display a success message.

5. Disconnect your phone, reassemble the back cover, and reboot the device.

Troubleshooting Common Flashing Issues

1. Device Not Detected in EDL Mode

• Ensure the Qualcomm USB drivers are installed correctly.
• Try using a different USB cable or port.
• Double-check the Test Point connection.

2. Flashing Process Fails

• Confirm the bootloader is unlocked.
• Verify the ROM file is correct and not corrupted.
• Restart your PC and try the process again.

3. Stuck in Bootloop After Flashing

• Reflash the ROM using the Clean All option.
• Make sure you are using the correct firmware for your device.

Important Notes

1. Battery Level: Ensure your phone’s battery is sufficiently charged (50% or more) before starting the flashing process.

2. ROM Integrity: Always download tested ROM files from trusted sources to avoid bricking your device.

3. Follow Instructions Carefully: Skipping steps may result in flashing errors or further issues.

FAQs

Can I Flash Xiaomi Mi A2 Without Unlocking the Bootloader?

No, unlocking the bootloader is mandatory for flashing the Xiaomi Mi A2.

What is EDL Mode?

EDL Mode (Emergency Download Mode) allows you to flash your device even when it’s bricked or unresponsive. In this mode, the phone’s screen remains blank, and it is recognized as a COM port on your PC.

How Do I Check If My Phone Is in EDL Mode?

When your phone is in EDL Mode, it will be listed as a COM port in the Xiaomi Flash Tool, but the screen will remain black.

Conclusion

Congratulations! You have successfully flashed your Xiaomi Mi A2 using the EDL Test Point method. Whether you were fixing a bricked phone or updating your firmware, this guide should have helped you complete the process with ease.

If you found this guide helpful, don’t forget to share it with others who might need it. If you face any issues or have questions, feel free to leave a comment below. We’re here to help!