Tecno IN2 in that problems of FRP Lock, Google Lock and want to bypass it so don't worry you can easy done using this guide cause tested by me without any risk if your device in hard ware issue like shorting then can be risky everyone please be carefully use who follow this method for reset FRP lock required all are in below links that must be have without it not possible to reset frp lock this is for free every one can use without any boxes must read below description. This method can be used without any box its done from flash tool it's also available here, and it is important to installing phones driver, you can't flash or upgrade if it is not installed on your computer or laptop it must be installed and also available in this post, here all are linked that tested and working fine just in one try

• Tecno IN2 USB Driver or Flash tool

Tecno IN2 want to reset FRP Lock , can try to repair it by. have to charge a battery with any charger and charged it by 80%. Your data is very important for so it is good to do a backup of data it may consist of contact details, important messages, emails or any other important thing which feel to be the backup in a device. This backup can be done on another device. we have to do the backup because after a format of a device, all data will be gone and it will not be recovered. For backup in other devices, you can use another external device like hard drive, SD card or any other suitable devices. If are doing by own. do it at your own risk as we don't take any responsibility if a device is damaged

Requisite

• Tecno IN2 Android Phone with Good battery charged do not try with low battery
• Tecno IN2 Format code
• Tecno IN2 FRP reset tool
• Tecno IN2 USB Driver
• Micro USB Cable with Good quality

Procedure

• Download all are files from the above links if link not working just leave your comment on below comment box
• Install WinRAR software in your computer or laptop for extract downloaded links
• Extract all file and paste to desktop
• First Install MediaTek USB Driver and after that Reboot (Restart) Computer
• Open SP flash tool click on Scatter-loading choose button and select MT6739_Android_scatter.txt file
• Now Jump to Format Tab and click to Manual Format flash
• Copy 0x2d88000 code and paste to Begin Address[HEX]
• Copy 0x100000 code and paste to Format Length[HEX]

• Now click on Start button
• Turn off Mobile wait 5 seconds
• Just Insert USB cable to device then automatically detect phone with SP Flash tool
• Wait until complete the process