Micromax Canvas 1 C1 Remove FRP Success by SP Flash tool

Factory Reset Protection (FRP) is a security feature on Android devices that prevents unauthorized access to the device after a factory reset. If you are locked out of your Micromax Canvas 1 C1 due to FRP, you can bypass this lock using the SP Flash Tool. Follow the detailed procedure below to successfully bypass the FRP lock.

Prerequisites

Before you begin, ensure you have the following:

Micromax Canvas 1 C1 Android Phone with Good battery charged do not try with low battery
Micromax Canvas 1 C1 Format code
Micromax Canvas 1 C1 FRP reset tool
Micromax Canvas 1 C1 USB Driver
Micro USB Cable with Good quality

Step-by-Step Procedure

1. Download Necessary Files

Ensure all required files are downloaded. If you encounter any issues with the download links, leave a comment below for assistance.

2. Install WinRAR

Download and install WinRAR software on your computer. This tool will help you extract the downloaded files.

3. Extract Files

Extract all downloaded files using WinRAR and move them to your desktop for easy access.

4. Install Micromax Canvas 1 C1 (MediaTek) USB Drivers

Install the Lenovo USB Drivers on your computer to ensure your device can communicate with the SP Flash Tool.
After installing the drivers, reboot (restart) your computer.

5. Open SP Flash Tool

Navigate to the SP Flash Tool folder and open the application.

6. Load Scatter File

In the SP Flash Tool, click on the "Scatter-loading" button.
Browse to the MT6737M_Android_scatter folder and select the MT6737M_Android_scatter.txt file.

7. Format the Device

Switch to the "Format" tab within the SP Flash Tool.
Select the "Manual Format Flash" option.
Copy and paste the following codes into the respective fields:

Begin Address [HEX]: 0x6a00000
Format Length [HEX]: 0x100000

Click on the "Start" button to begin the formatting process.

8. Prepare Your Device

Turn off your Micromax Canvas 1 C1 and wait for about 5 seconds.

9. Connect Your Device to the Computer

Connect your device to the computer using a USB cable. If the device is not detected automatically by the SP Flash Tool, try the following:

Press and hold the Volume Up button while inserting the USB cable.
If that doesn’t work, press and hold the Volume Down button while inserting the USB cable.

10. Complete the Process

Wait patiently until the SP Flash Tool completes the formatting process. Once done, you should see a confirmation message indicating the success of the operation.

Conclusion

By following these steps, you should be able to bypass the FRP lock on your Micromax Canvas 1 C1 using the SP Flash Tool. If you encounter any issues during the process, feel free to leave a comment below for further assistance.

Download Links