Removing the Factory Reset Protection (FRP) lock from your Micromax Q440 can be a challenging task, but with the right tools and steps, you can successfully bypass the lock. This guide will walk you through the process of using the SP Flash Tool to remove the FRP lock on your Micromax Q440.
Requisite
- Micromax Q440 Android Phone with Good battery charged do not try with low battery
- Micromax Q440 Format code
- Micromax Q440 FRP reset tool
- Micromax Q440 USB Driver
- Micro USB Cable with Good quality
Steps to Remove FRP Lock on Micromax Q440
Step 1: Download Necessary Files
- Download all required files from the provided links. If a link is not working, leave a comment in the comment box below.
- Install WinRAR software on your computer or laptop to extract the downloaded files.
Step 2: Extract Files
- Extract all downloaded files using WinRAR.
- Paste the extracted files on your desktop for easy access.
Step 3: Install MTK USB Drivers
- First, install the MTK USB Drivers from the extracted files.
- After the installation is complete, reboot (restart) your computer.
Step 4: Launch SP Flash Tool
- Open the extracted SP Flash Tool folder.
- Find and run the flash_tool.exe file.
- If prompted by Windows Firewall, allow access.
Step 5: Load Scatter File
- In SP Flash Tool, click on the "Scatter-loading" button.
- Navigate to the folder where you extracted the Micromax Q440 Scatter File.
- Select the MT6737M_Android_scatter.txt file and click "Open".
Step 6: Format FRP Partition
- Go to the Format tab in SP Flash Tool.
- Select "Manual Format Flash".
- Copy 0x6a00000 and paste it into the "Begin Address [HEX]" field.
- Copy 0x100000 and paste it into the "Format Length [HEX]" field.
- Click the "Start" button.
Step 7: Connect Your Phone
- Turn off your Micromax Q440 and wait for 5 seconds.
- Connect your phone to the PC using the USB cable. The SP Flash Tool should detect your device automatically.
- If the tool does not detect your phone, try pressing and holding the Volume Up button while inserting the USB cable.
- Alternatively, press and hold the Volume Down button while inserting the USB cable.
Step 8: Flash FRP Partition
- Once your device is detected, the formatting process will begin automatically.
- Wait for the process to complete. You will see a green checkmark when it’s done.
Step 9: Reboot Your Phone
- Disconnect your phone from the PC.
- Power on your Micromax Q440.
- The FRP lock should now be removed.
Troubleshooting Tips
If SP Flash Tool doesn’t detect your device, try reinstalling the MTK USB Drivers.
Ensure that your phone’s battery is sufficiently charged before starting the process.
Use a high-quality USB cable to avoid connectivity issues.
Conclusion
By following these steps, you can successfully remove the FRP lock on your Micromax Q440 using SP Flash Tool. Always ensure you follow the instructions carefully to avoid any potential issues. If you encounter any problems, feel free to seek help from online forums or professional technicians.
Removing FRP locks can help you regain access to your device, but always remember to use this knowledge responsibly.
Download Links
Micromax Q440 frp lock remove | Hindi - हिंदी
No comments:
Post a Comment
Write Your Problem in the Below Comment Box