-->
Thursday, April 19, 2018

How to Remove FRP Lock LAVA Z90 by SP Flash tool

Posted by
Thursday, April 19, 2018
Sponsored Links
Factory Reset Protection (FRP) is a security feature on Android devices that prevents unauthorized access after a factory reset. However, if you need to bypass this feature on your LAVA Z90, you can use the SP Flash Tool. Here’s a step-by-step guide on how to do it.

Requisite

  • LAVA Z90 Android Phone with Good battery charged do not try with low battery
  • LAVA Z90 Format code
  • LAVA Z90 FRP reset tool
  • LAVA Z90 USB Driver
  • Micro USB Cable with Good quality

Step 1: Download Necessary Files

First, download all the required files. If any links are broken, leave a comment below this article, and we will provide updated links.

Step 2: Install WinRAR

Ensure you have WinRAR installed on your computer or laptop to extract the downloaded files. You can download it from the official WinRAR Link.

Step 3: Extract the Files

Once downloaded, extract all the files and paste them on your desktop for easy access.

Step 4: Install Lava Z90 USB Driver

Install the Lava Z90 USB Driver to ensure your computer can communicate with the LAVA Z90. After installation, reboot (restart) your computer.

Step 5: Open SP Flash Tool

Open the SP Flash Tool on your computer. Click on the "Scatter-loading" button and navigate to the LAVA Z90 FRP file folder. Select the MT6737M_Android_scatter.txt file.

Step 6: Format the Device

Switch to the "Format" tab in the SP Flash Tool and select "Manual Format Flash". You can download Lava Z90 FRP file from the link.

Step 7: Enter Format Parameters

Copy the code 0x6a00000 and paste it into the "Begin Address[HEX]" field.
Next, copy the code 0x100000 and paste it into the "Format Length[HEX]" field.

Step 8: Start the Process

Click the "Start" button to initiate the formatting process.

Step 9: Prepare the Mobile Device

Turn off your LAVA Z90 and wait for 5 seconds.

Step 10: Connect the Device to the Computer

Press and hold the Volume Up + Down buttons on your LAVA Z90 and insert the USB cable to connect the device to your computer. The SP Flash Tool should automatically detect your phone. If it doesn’t, try pressing and holding either the Volume Up or Volume Down button while inserting the USB cable.

Step 11: Wait for Completion

Wait for the process to complete. Once finished, you should see a success message on the SP Flash Tool.

How to Remove FRP Lock LAVA Z90 by SP Flash tool

Conclusion

By following these steps, you can successfully remove the FRP lock on your LAVA Z90 using the SP Flash Tool. If you encounter any issues or have any questions, feel free to leave a comment below, and we’ll assist you as soon as possible.


LAVA Z90 frp lock remove | Hindi - हिंदी
Sponsored Links

No comments:

Post a Comment

Write Your Problem in the Below Comment Box