If you own a Redmi Note 5 (MEI7) and it's bricked, don't worry—this guide will help you unbrick and repair your device. Follow these detailed steps to bring your phone back to life.
What You Need
- PC or Laptop with Windows OS.
- USB Cable to connect your Redmi Note 5 (MEI7) to the PC.
- Redmi Note 5 (MEI7) Stock ROM Firmware
- Redmi Note 5 (MEI7) Flash Tool
- Redmi Note 5 (MEI7) Qualcomm USB Drivers installed on your PC.
- Patience and attention to detail.
Step-by-Step Guide to Unbrick Redmi Note 5 (MEI7)
Step 1: Install Qualcomm USB Drivers
- Download the Qualcomm USB Drivers.
- Extract the downloaded file (WinRAR Software for Zip Extract).
- Run the installer and follow the on-screen instructions to install the drivers on your PC.
- Restart your PC after the installation is complete.
Step 2: Download and Redmi Note 5 (MEI7) Tool
- Download the tool from below link.
- Extract the downloaded tool to a convenient location on your PC.
Step 3: Download and Extract Firmware
- Download the official firmware for your Redmi Note 5 (MEI7).
- Extract the firmware to a folder on your PC.
Step 4: Boot Your Redmi Note 5 into EDL Mode
- Power off your Redmi Note 5 completely.
- Open the back cover and check the Redmi Note 5 (MEI7) Test Point (refer to the image below).
- Touch the two points from the extracted phone and insert the USB cable to enter EDL Mode
- Your phone should now enter EDL (Emergency Download Mode).
Step 6: Configure Xiaomi Flash Tool
- Open C:\XiaoMi\XiaoMiFlash\ and choose the XiaoMiFlash.exe file to open it.
- Click on the "Select" button and choose the vince_global_images_V9.2.6.0.NEGMIEK_20180122.0000.00_7.1_global_7410dfd97a extracted firmware.
- Choose "clean all and lock" in the flash tool options below.
- Click the "Refresh" button in the XiaoMiFlash Tool. You should see COM:10 or another COM port on the flash tool.
- Tick "clean all and lock" (Note: If the device is cloud-locked, you can use this option; otherwise, choose another option).
- Click the "Flash" button and wait until the process finishes. Do not unplug the device while it is in flashing mode.
Step 7: Start the Flashing Process
- Ensure your Redmi Note 5 is still connected to the PC in EDL mode.
- Click on the "Download" button in QFIL to start the flashing process.
- Wait for the process to complete. This may take several minutes.
Step 9: Reboot Your Device
- Once the flashing process is complete, Xiaomi Flash Tool will show a "Download Succeeded" message.
- Disconnect your phone from the PC.
- Press and hold the Power button until your phone reboots.
Conclusion
Unbricking and repairing your Redmi Note 5 (MEI7) is a straightforward process if you follow the steps carefully. By using the QFIL tool and the correct firmware, you can revive your device and get it back to working condition. Remember to always download firmware and tools from trusted sources to avoid further issues. If you encounter any problems, refer to the troubleshooting tips or seek help from online forums and communities dedicated to Xiaomi devices.
For hint check below video
No comments:
Post a Comment
Write Your Problem in the Below Comment Box