Flashing your Oppo F3 (CPH1609) with the stock ROM can resolve software issues, unbrick your device, or return it to its original factory state. The following steps are tested and verified, ensuring a successful flashing process.
Prerequisites
Before you start, ensure you have the following:
- WinRAR Software: Install WinRAR on your computer to extract files.
- Flashing Files: Download the necessary files, including the stock ROM and flash tool. If the download link is broken, leave a comment, and I'll address the issue as soon as possible.
- USB Cable: Use a reliable USB cable for connecting your device to the computer.
- Backup Your Data: Flashing the stock ROM will erase all data, so make sure to back up your important files.
Download Link
Oppo F3 (CPH1609) Firmware (Stock ROM)
Step 1: Prepare the Flashing Files
1. Download and Extract Files:
- Download the required files for flashing.
- Use WinRAR to extract the files to a convenient location on your desktop for easy access.
2. Copy the Flasher Tool Files:
- Open the folder named OPPO F3 Flasher tool.
- Copy the files OPPO F3 Flasher By gsmdevlopers.exe and OPPO.key.
3. Paste the Files in the ROM Folder:
- Navigate to the folder named CPH1609EX_11_A.04_170426.
- Paste the copied files (OPPO F3 Flasher By gsmdevlopers.exe and OPPO.key) into this folder.
Step 2: Flash the Stock ROM
1. Launch the Flasher Tool:
- Double-click on the OPPO F3 Flasher By gsmdevlopers.exe file to open the flashing tool.
2. Start the Flashing Process:
- Click on the Start button in the flasher tool.
- Wait until the checksum process completes.
3. Prepare Your Device:
- Turn off your Oppo F3 (CPH1609).
- Press and hold both the Volume Up and Volume Down buttons simultaneously.
4. Connect Your Device to the Computer:
- While holding the buttons, insert the USB cable into the device.
- The flasher tool will detect your device and begin the flashing process.
5. Wait for the Flashing Process to Complete:
- The process may take several minutes. Be patient and wait until it is fully completed.
- Once done, you will see a confirmation message indicating that the flashing process was successful.
Step 3: Reboot Your Device
1. Disconnect the Device:
- Safely disconnect your Oppo F3 from the computer.
2. Power On the Device:
- Press the Power button to turn on your Oppo F3.
- The device will now boot into the newly installed stock ROM.
Oppo F3 (CPH1609) Flash done Screenshot:
Oppo F3 (CPH1609) video tutorial
Conclusion
You've successfully flashed your Oppo F3 (CPH1609) with the stock ROM using the provided flash tool. This tested method should help you resolve any software issues or revert your device to its factory settings. If you encounter any problems or need further assistance, feel free to leave a comment below.
No comments:
Post a Comment
Write Your Problem in the Below Comment Box