Tecno I3 Pro FRP Remove with SP Flash tool

Unlocking the Factory Reset Protection (FRP) on the Tecno I3 Pro can be a straightforward process when using the SP Flash Tool. This guide will walk you through the steps to remove the FRP lock and provide insights into potential connection issues, troubleshooting tips, and the minimum battery requirements for successful flashing.

Step 1: Download Necessary Files

First, you need to download all the required files, including the SP Flash Tool, the Tecno I3 Pro scatter file, and the DA file. Ensure that you have all files ready before proceeding.

Note: If any download links are not working, please leave a comment below, and we’ll update the links as soon as possible.

Step 2: Install WinRAR Software

To extract the downloaded files, install WinRAR on your computer. Once installed, extract the files to your desktop for easy access.

Step 3: Install TECNO I3 Pro USB Drivers

Before proceeding with the flashing process, it’s crucial to install the Lenovo USB drivers on your computer. After installation, restart your computer to ensure the drivers are properly configured.

Step 4: Load Scatter File in SP Flash Tool

1. Open the SP Flash Tool.
2. Click on the “Download-Agent” button and select the DA_SWSEC.bin file.
3. Next, click on the “Scatter-loading” button and select the MT6737M_Android_scatter.txt file from the extracted Tecno_i3_frp folder.

Step 5: Manual Format Flash

1. Navigate to the “Format” tab in the SP Flash Tool.
2. Choose “Manual Format Flash.”
3. Enter the following values:
   • Begin Address [HEX]: 0x6a00000
   • Format Length [HEX]: 0x100000
4. After entering the values, click on the “Download” button.

Step 6: Connect Your Device

1. Turn off your Tecno I3 Pro completely.
2. Connect your device to the computer using a USB cable.
3. Wait for the process to complete. The SP Flash Tool will automatically detect your device and begin formatting.

Minimum Battery Requirement

Ensure that your Tecno I3 Pro has at least 50% battery before starting the flashing process. A low battery can lead to interruptions during the flashing, potentially causing further issues with the device.

Reasons Why Tecno I3 Pro Might Not Connect with SP Flash Tool

• Driver Issues: If the Lenovo USB drivers are not installed correctly, the device may not be recognized by the SP Flash Tool.
• Faulty USB Cable: A damaged or incompatible USB cable can prevent the tool from detecting the device.
• Wrong USB Port: Sometimes, switching to a different USB port on your computer can resolve connection issues.
• Battery Level: If the battery is critically low, the device might not connect properly. Ensure a sufficient charge before proceeding.

Troubleshooting Connection Issues

• Reinstall USB Drivers: If your device is not detected, try reinstalling the USB drivers and rebooting your computer.
• Use a Different USB Cable/Port: Switch to a different USB cable or port to rule out hardware issues.
• Check Device Manager: In some cases, the device might show up in the Device Manager with an error. Right-click and update the driver software.
• Disable Digital Signature Enforcement: If using Windows, disabling digital signature enforcement might help if driver installation fails.

Conclusion

Removing the FRP lock from your Tecno I3 Pro using the SP Flash Tool is a simple process when following these steps. By ensuring you have the right files, drivers, and sufficient battery, you can avoid common issues that might arise during the flashing process. If you encounter any problems or have questions, feel free to leave a comment, and we'll assist you further.