The Redmi Note 4 is a popular mid-range smartphone known for its impressive specs and affordable price. However, like any electronic device, it can encounter issues such as dead boot or various software problems. In this article, we will guide you through the steps to repair a dead boot on the Redmi Note 4 (2016100) and fix common software issues.
Understanding Dead Boot
A dead boot situation occurs when your Redmi Note 4 fails to power on, shows no signs of life, and does not respond to charging or button presses. This can be caused by software corruption, failed firmware updates, or hardware malfunctions.
Prerequisites
- Redmi Note 4 2016100 device with well battery charged, do not try with low battery
- Redmi Note 4 2016100 Stock ROM Firmware
- Redmi Note 4 2016100 QFIL Flash Tool
- Redmi Note 4 2016100 USB (Flashing) Driver
- Micro USB cable with Good Quality
- Computer or Laptop
Steps to Repair Dead Boot
Step 1: Install Qualcomm USB Drivers
- Download the Qualcomm USB drivers.
- Extract the downloaded file and run the setup.
- Follow the on-screen instructions to install the drivers on your PC.
Step 2: Download and Install QPST Flash Tool
- Download the QPST Flash Tool.
- Extract the downloaded file and run the setup.
- Follow the on-screen instructions to install the QPST Flash Tool on your PC.
Step 3: Download the Firmware/ROM
- Download Redmi Note 4 (2016100) Firmware (Stock ROM).
- Extract the downloaded firmware to a folder on your PC.
Step 4: Enter EDL Mode
- To repair a dead boot, you need to put your Redmi Note 4 into Emergency Download Mode (EDL). Here’s how:
- Power off your phone completely.
- Disconnect the battery of your phone.
- Connect 2 points using a metal wire (refer to the image below for the exact points).
Step 5: Flash the Firmware
- Connect your phone to the PC using the USB cable.
- Open QFIL from the "C:\Program Files\Qualcomm\QPST\bin" path.
- Go to Select Programmer option and click on the Browse button. Select prog_emmc_firehose_8929.mbn from the SW Folder file.
- Click on Load XML button and choose rawprogram0.xml file and then patch0.xml file from the firmware folder.
- Click on the Download button and wait for the process to complete.
Fixing Common Software Problems
Apart from dead boot issues, the Redmi Note 4 can encounter various software problems. Here are some common issues and their solutions:
Problem 1: Boot Loop
Solution:
- Boot into Recovery Mode by pressing and holding the Volume Up and Power buttons.
- Use the Volume buttons to navigate and select ‘Wipe Data/Factory Reset.’
- Confirm the action and wait for the process to complete.
- Reboot your phone.
Problem 2: System UI Not Responding
Solution:
- Go to Settings > Apps > System UI.
- Clear Cache and Data.
- Reboot your phone.
- Problem 3: App Crashes
Solution:
- Go to Settings > Apps > [App causing the issue].
- Clear Cache and Data.
- Update the app from the Google Play Store.
- Problem 4: Overheating
Solution:
- Avoid using the phone while charging.
- Close background apps when not in use.
- Check for software updates and install them.
- Problem 5: Battery Draining Fast
Solution:
- Go to Settings > Battery > Battery Usage.
- Identify apps consuming excessive battery and restrict their background activity.
- Enable Battery Saver mode.
Conclusion
Repairing a dead boot and fixing software problems on the Redmi Note 4 (2016100) can be a straightforward process if you follow the correct steps. Ensure you have the necessary tools and firmware before starting. By addressing these issues, you can extend the life of your device and enjoy a smoother user experience. If the problems persist, consider seeking professional help or visiting an authorized service center.
If you encounter any issues with the provided links or need further assistance, leave a comment below, and we'll be happy to help you out!
fill corrupted
ReplyDeleteExtract with 7-zip software download from this link here
Deletehow to edl mode
ReplyDeletePress and hold Volume Up + Down and Insert USB cable
Deleteits tar file not mbn firehose
ReplyDeletePlease say clearly :) I don't understand what you say
Deletei will connect 2 points using metal wire but not detect the mobile plz help me
ReplyDeleteIf same device then not possible to not detect cause tested by me
Deleterog_emmc_firehose_8929.mbn is not for redmi note 4 sd.. It's 8953
ReplyDeletebefore Extract zip file must rename firmware zip file to .tgz, if is .gz or tar after that extract then you can see file
DeleteOk, i'l try again it later
ReplyDeleteIt's already.tgz...
ReplyDeleteAfter extracted you can't see your required file ?
DeleteWhat i saw is rog_emmc_firehose_8953.mbn..but not rog_emmc_firehose_8929..
ReplyDeleteThe programmer will be prog_emmc_firehose_8953_ddr.mbn found inside the “mido_global_images_V8.1.10.0” folder if not shown file then follow this firmware here
DeleteThanks.. Yes it is.. But when download process it says firehore fail.. What to do next
ReplyDeletePaste firmware folder on Desktop ya D Drive and try again
DeleteStill the same.. Firehose fail/sahara fail..
ReplyDeleteFollow this here after that try again
DeleteNothing more happened.. Still stuck on fire hose fail...
ReplyDeleteCan I know where path firmware folder ?
Deletesuper it worked
ReplyDelete