Flashing your Xiaomi Redmi 4A can resolve software issues, unbrick your device, or even revert to stock firmware. This guide will walk you through the entire process, ensuring that your Redmi 4A is successfully flashed. Please follow each step carefully to avoid any complications.
Prerequisites:
- Xiaomi Redmi 4A device with good battery charged, do not try with low battery
- Xiaomi Redmi 4A Stock ROM Firmware
- Xiaomi Redmi 4A Flash Tool
- Xiaomi Redmi 4A USB Driver (for Flashing)
- Micro USB Cable with good quality
- Computer or Laptop
Step 1: Preparing the Firmware
1. Download the Firmware:- If you haven't already, download the tested ROM and the necessary Flash tool from the link above.
- Locate the downloaded firmware file, which might be in a .gz or .tar format.
- Right-click the file and rename it to .tgz to ensure compatibility with the flashing process.
- Use WinRAR or any other extraction tool to extract the firmware file. Ensure that the extracted firmware folder is located on your desktop or in the C: drive for easy access.
Step 2: Setting Up XiaoMiFlash Tool
1. Open XiaoMiFlash Tool:
- Navigate to C:\XiaoMi\XiaoMiFlash\ on your computer.
- Double-click on XiaoMiFlash.exe to open the flash tool.
2. Select Firmware Folder:
- In the XiaoMiFlash Tool, click on the “Select” button.
- Browse and select the full firmware folder you extracted to the desktop.
3. Choose Flashing Options:
- On the bottom of the XiaoMiFlash Tool, select the "clean all and lock" option. This is crucial for ensuring that your device is properly flashed.
Step 3: Flashing the Redmi 4A
1. Enter Download Mode:
- Power off your Redmi 4A.
- Press and hold the Power + Volume Up buttons simultaneously to enter Download Mode.
- Connect your device to the computer using a USB cable. Wait for the necessary drivers to install.
2. Install Drivers (If Needed):
- If the drivers do not install automatically, go to My Computer ➦ Properties ➦ Device Manager.
- Right-click on the connected device and select "Update driver." Use the drivers from the download link above if needed.
3. Refresh XiaoMiFlash Tool:
- Click the "Refresh" button in the XiaoMiFlash Tool. You should see COM:10 or a similar COM port number indicating your device is recognized.
4. Choose the Correct Option:
- If your device is cloud-locked, make sure to select "clean all and lock." Otherwise, you can choose another option as per your requirement.
5. Begin Flashing:
- Click the "Flash" button in the XiaoMiFlash Tool.
- Wait patiently for the flashing process to complete. Do not unplug your device during this process, as it could lead to a bricked device.
Step 4: Completion
- Once the flashing process is complete, your Redmi 4A will automatically reboot.
- Congratulations, your Xiaomi Redmi 4A has been successfully flashed!
Troubleshooting:
- If you encounter any issues during the flashing process, such as the device not being recognized, double-check your drivers and USB connection. If you still face problems, feel free to ask for help in the comment section below.
Note: Flashing your device will erase all data. Ensure you have backed up your important files before proceeding.
This guide is intended for those with some technical knowledge. If you're unsure about any steps, it's recommended to consult with a professional or seek further guidance.
Xiaomi Redmi 4A Flash
Can't work
ReplyDeleteCan I know what happen in your mobile ?
Delete