Swipe Elite Plus few specification:
Operating System : Android 5.1, Processor : 1.5 GHz octa-core, Processor make : Qualcomm Snapdragon 615, RAM : 2GB, Internal storage : 16GB, Expandable storage Yes, Expandable storage type microSD, Expandable storage up to 64GB
Read about this method:
This guide really simple for any type problems solve of software related because tested by me when I was try this guide first read all carefully description which is device not connect with computer or laptop or about Stock ROM Firmware so I suggest you before use first read carefully all are description that is most impotent after try step by step following if any query using this method just leave your comment on below comment box I will soon fix it if possible and this device in software update or fix software problems method different in regular device if any skip option will device dead or another to be issue in post totally give hints I am sure you properly follow this guide your device was success but need should be a software issues let's know how to flash or fix software problems in Swipe Elite Plus ?
If want to repair device, can try to repair it by. have to charge a battery with any charger and charged it by 91%. Your data is very important for so it is good to do a backup of data it may consist of contact details, important messages, emails or any other important thing which feel to be the backup in a device. This backup can be done on another device. we have to do the backup because after a format of a device, all data will be gone and it will not be recovered. For backup in other devices, you can use another external device like hard drive, SD card or any other suitable devices. If are doing by own. do it at your own risk as we don't take any responsibility if a device is damaged
Reason of not detect device with Computer or Laptop:
This method can be used without any box its done from flash tool it's also available here, and it is important to installing phones driver, you can't flash or upgrade if it is not installed on your computer or laptop it must be installed and also available in this post, here all are linked that tested and working fine just in one try you can easily solve any problem with this method if you are fresher technician or experienced technician in android software related if the error occurs of USB not recognized then your USB is not working.if a battery is not charged,your USB socket will not proper work and you will fail in this method. if any issues please write your questions in the comment box I will try my best to help you.
This flash file is tested by me and it is working very well without any error, can use this flash file when device can use this guide when device in hang on logo, restarting, auto turn on internet connection, auto turn on WiFi connection, auto app installing, auto gone balance, pattern lock, screen lock etc these type issues can use this way etc. This is used without any tool and box.and also free for all who has knowledge about software in mobiles.for flashing file it is most important to first check micro USB cable. if it is not good, can not flash it. and the another one is to check device battery. it should not be low, it can stop device between flash. before the flash, it is necessary to save data like contacts, photos, videos and other important things.
Operating System : Android 5.1, Processor : 1.5 GHz octa-core, Processor make : Qualcomm Snapdragon 615, RAM : 2GB, Internal storage : 16GB, Expandable storage Yes, Expandable storage type microSD, Expandable storage up to 64GB
Read about this method:
This guide really simple for any type problems solve of software related because tested by me when I was try this guide first read all carefully description which is device not connect with computer or laptop or about Stock ROM Firmware so I suggest you before use first read carefully all are description that is most impotent after try step by step following if any query using this method just leave your comment on below comment box I will soon fix it if possible and this device in software update or fix software problems method different in regular device if any skip option will device dead or another to be issue in post totally give hints I am sure you properly follow this guide your device was success but need should be a software issues let's know how to flash or fix software problems in Swipe Elite Plus ?
- Related Post : Swipe Elite Plus Hard Reset
If want to repair device, can try to repair it by. have to charge a battery with any charger and charged it by 91%. Your data is very important for so it is good to do a backup of data it may consist of contact details, important messages, emails or any other important thing which feel to be the backup in a device. This backup can be done on another device. we have to do the backup because after a format of a device, all data will be gone and it will not be recovered. For backup in other devices, you can use another external device like hard drive, SD card or any other suitable devices. If are doing by own. do it at your own risk as we don't take any responsibility if a device is damaged
Reason of not detect device with Computer or Laptop:
This method can be used without any box its done from flash tool it's also available here, and it is important to installing phones driver, you can't flash or upgrade if it is not installed on your computer or laptop it must be installed and also available in this post, here all are linked that tested and working fine just in one try you can easily solve any problem with this method if you are fresher technician or experienced technician in android software related if the error occurs of USB not recognized then your USB is not working.if a battery is not charged,your USB socket will not proper work and you will fail in this method. if any issues please write your questions in the comment box I will try my best to help you.
- Related Post : Swipe Elite Plus USB Driver or Flash Tool
This flash file is tested by me and it is working very well without any error, can use this flash file when device can use this guide when device in hang on logo, restarting, auto turn on internet connection, auto turn on WiFi connection, auto app installing, auto gone balance, pattern lock, screen lock etc these type issues can use this way etc. This is used without any tool and box.and also free for all who has knowledge about software in mobiles.for flashing file it is most important to first check micro USB cable. if it is not good, can not flash it. and the another one is to check device battery. it should not be low, it can stop device between flash. before the flash, it is necessary to save data like contacts, photos, videos and other important things.
Download Links
Swipe Elite Plus USB Driver
Swipe Elite Plus Flash tool
Required for Swipe Elite Plus:
- Swipe Elite Plus device with well battery charged, do not try with low battery
- Swipe Elite Plus Stock ROM Firmware (tested)
- Swipe Elite Plus USB Flashing driver
- Swipe Elite Plus Flash Tool
- Micro USB cable good quality
- Computer or Laptop
Procedure for Swipe Elite Plus:
- First download tested Firmware, Flash tool or driver from above link (if link not working just leave your comment on below comment box i will soon fix it)
- Extract to all are zip files to desktop or as you like path (must be installed winrar software to Extract)
- Open Driver folder and choose Qualcomm_USB_Driver_Setup.exe file and wait until finish installation
- Open QPST.WIN.2.7_Installer-00430.1 folder and chose setup.exe file and open and install it
- Now open QFIL from the "C:\Program Files\Qualcomm\QPST\bin" path
- Tick on Flat Build option
- Go to Programmer Path and click on Browse.. button and choose prog_emmc_firehose_8916.mbn file
- Click on Load XML.. button and choose rawprogram_unsparse.xml file and second choose patch0.xml file from the Firmware folder
Note : Above Screenshot for Example
- Press and hold Volume Up and Insert USB cable and displayed download mode option Press Volume Up for a few second device switching hovers in Download and wait until driver install and already installed then device show on flash tool
- After drier installed just Click on Download button and wait until finish procedure
- Congratulation you are done
Swipe Elite Plus Flash done Screenshot:
Swipe Elite Plus Flash done video:
hi i have lenevo a6000 it got bricked so when i hold the volume buttons and plug the usb the screen on and suddenly it off's
ReplyDeleteLink working well :) check again
ReplyDeleteMust charged your battery and try again :)
ReplyDeleteHow to change ROM of swipe elite plus
ReplyDeleteWhich Android OS you want Installed ?
DeletePlease provide custom rom for swipe elite plus
ReplyDeleteAbove given link really working well try again if any query just leave your message here
Deletemy swipe elite plus is cannot swich on .... onece upone time is swich on and screen is blank so how to fix
ReplyDeletethank in advance
Try this one Firmware : here, Flash tool : here, USB Driver : here ....Good Luck
DeleteSame result.... Still Display get blink
DeleteCheck Battery charge it first maximum 90% charge battery in offline mode
Deletemy swipe elite plus is cannot swich on .... onece upone time is swich on and screen is blank so how to fix
ReplyDeletethank in advance
Already given reply
DeletePliz... How to fix this problem
Deletealready given reply
DeletePress and hold Volume Up and Insert USB cable and displayed download mode option Press Volume Up for a few second device switching hovers in Download and wait until driver install and already installed then device show on flash tool
ReplyDeleteMy phone is getting in downloading mode! because it is brick help me
USB Driver Update from the manual update which device manager
DeleteHi, im unable to download Qualcomm QFIL Flash Tool
ReplyDeletealso there is lots of versions so can you tell me which one to install ?
pls check no one link is working
Download from the here
Deletethank, now new problem is, Download fail, Fire hose fail FHLoader fail: process fail
ReplyDeletehave a look on screen shot
http://prnt.sc/dws2p3
pls give the solutions for the same
Which windows use ?
DeleteCheck below comment reply there given guide just follow that
DeleteSir, its windows 7 ultimate, 32 bit operating system
ReplyDeleteMust Disable Driver signature use this video here and try again
DeleteNow software get update successfully, but when start to phone its once show the logo then shutdown, here is log file
ReplyDeletehttps://ufile.io/bdcde
First Charge full battery and after that do hard reset
DeletePress and hold Volume Up and Insert USB cable and displayed download mode option Press Volume Up for a few second device switching hovers in Download and wait until driver install and already installed then device show on flash tool.
ReplyDeleteThe download option not displays after inserting USB cable
Try Volume Up OR Down and Insert USB Cable
DeleteI try this but every time when I insert USB cable my elite plus vibrate and starts and shows its logo and then it starts brinking and no change in download option .
DeleteI try this but still the download option not displayes and it shows no port available .
DeleteDid you check another USB cable ? and change also PC
Deletesir switch on and presing volume button is not work
ReplyDeleteFor flashing must required EDL Model brother
DeleteThank you sir now download option is visible but how can I solve not port available problem .
ReplyDeleteClick on SelectPort.... check on Show Non QDLoader/DIAG Port
DeleteThank you sir now this is solve but again when I click on download after some time in the status box emmc fail occurs .
ReplyDeleteI think emmc fail means hardware issue
DeleteDownload complete but now my device is not switching on , I have charge my device already .
ReplyDeleteKeep pressing continue within 3 minutes :)
DeleteI have keep pressing for dome mnute but still no change
DeleteTry Press and hold Volume Down + Power both keys same time until 3 minutes
Deletefinely i reach the service center, he said its hardware problem, will send back to company will take 15-20 days, very bad device i have seen in my life
ReplyDeleteAlready given result hardware problem check this comment here
Deletehere is my log file
ReplyDeleteENABLEMULTISIM:True
Load ARG Configuration
Validating Download Configuration
Image Search Path: C:\Users\Abhishek\Desktop\swipe flash\Q39_zhongxing_20150717
RAWPROGRAM file path: C:\Users\Abhishek\Desktop\swipe flash\Q39_zhongxing_20150717\rawprogram0_unsparse.xml
PATCH file path:C:\Users\Abhishek\Desktop\swipe flash\Q39_zhongxing_20150717\patch0.xml
Programmer Path:C:\Users\Abhishek\Desktop\swipe flash\Q39_zhongxing_20150717\prog_emmc_firehose_8936.mbn
Process Index:0
Start Download
COM Port number:12
Switch To EDL
Download Fail:Switch To EDL FailFailed to Switch to Emergency Download mode
Finish Download
any solution?
Try to Press and hold Volume Up + Down and Insert USB cable try again sorry for late reply :)
Deleteall working fine. thanks
DeleteMy Pleasure
DeleteBoss all the above said that device is not starting did you solved this process
DeleteIf not solve then check in Hardware
DeleteCan you please tell me how to flash Swipe Konnect plus. I can't find the firmware.
ReplyDeleteDownload firmware from here and follow this post procedure if any query just write down here..Thank you and Good Luck
DeleteHi,
ReplyDeletemy swipe elite plus is over heating even if i browse the gallery pics for 10 mins. what should i do to reduce the heating prob.
Heating means I think hardware issue
Deletewhat is the specification storage of swipe elite plus ROM, now am downloading that which is not show the total MB
DeleteSorry I don't understand
DeleteI am getting sahara fail value cannot be null
ReplyDeleteThanks , i have flashed succesfully. But my problem is not solved. My phone problem was that after phone starts blinking after swipe logo whem i power on phone. I flashed stock rom but phone is not starting, only blinking black screen
ReplyDeleteCan I know before flashing what happen in device ?
DeleteMy phone was not booting. Only swipe logo is coming after pressing the power button. After swipe logo black screen comes.problem has not removed even after successfuly flashing stock rom
DeleteFlash with proper version
DeleteSame problem in my phone..
DeleteMy phone is not on. Only show black screen after flash.
Please help me.
...
I have a swipe elite plus. model:- swbm 01.
.
I completely all flesh proses..
But my phone is not On.
It is stop on Black Display..
Plz help me..
And i Download flash file in.
Firmwarefile.com
Give me Actual software version on your mobile I will give you correct firmware
Deleteswipe elite plus after switch on, elite plus logo apppear then black light flashing contionously.please solve this problem
ReplyDeleteI think battery is low first charge and try again
Deletehi sir I used swipe elite plus mobile sometimes my touchpad is automatically working without my knowledge.how to I solve it pls help me sir.
ReplyDeleteChange touch pad
Deleteboss, after pressing the download I'm getting an error can't switch to edl mode... but port is showing as android hgusb port 9008(com3) but getting edl error ...please solve my problem
ReplyDeletegive me error name
DeleteNeed to switch off the phone Vol up and Vol down and insert usb cable at a time problem solved
DeleteThanks for Guide brother
DeleteHow can I fix Switching to EDL fail error .
ReplyDeleteWhat happen not gone on EDL Mode ?
Deleteflash sucess but swipe elite plus logo hang on...what can i do please help me gsm hlpful
ReplyDeleteWait after flash phone many time until normal start
Deletewhat time reminding ? i already wait 15 minuts but hang logo
DeleteIf not turn on normal mode then try hard reset and turn on phone
Deletesir after flashing error my swipe elite plus dead pc not detect any solution
ReplyDeleteCheck battery I think is low if not solve then comment here again I will give you another way
DeleteSwip elite plus
ReplyDeleteBlack screen showing
Solution plese
In my swipe elite plus software problem not starting.
ReplyDeleteI want my all data. It's important for me
So how can I got it?
Please help.
Mo: 9825692121
Try Press and hold Volume Up and Insert USB cable long press volume up for download mode
DeleteSwipe Elite Plus Stock ROM Firmware (tested) | Download not Found
ReplyDeleteLink has been updated
DeleteDownload Fail:Switch to EDL FailFailed to Switch Emergency Download Mode
ReplyDeletei am getting this error while flashing swipe elite sense, i have tried all above mentioned things like pressing volume up + down then insert cable, but nothing worked. kindly tell me how to solve it as i need to flash my mobile soon.
Follow this first here after put firmware folder on C OR D Drive and try again
Delete