How to Flash Xiaomi Redmi Note 3 with Flash Tool ? (Tested)

This flash file is tested by me and it is working very well without any error, you can use this flash file when your device you can use this guide when your device in hang on logo, restarting, auto turn on internet connection, auto turn on WiFi connection, auto app installing, auto gone balance, pattern lock, screen lock etc these type issues you can use this way etc. This is used  without any tool and box.and also free for all who has knowledge about software in mobiles.for flashing file it is most important to first check your micro USB cable. if it is not good, you can not flash it. and the another one is to check your device battery. it should not be low, it can stop your device between flash. before you flash it is necessary to save your data like contacts, photos, videos and other important things.

Xiaomi Redmi Note 3 you can easily solve any problem with this method if you are fresher technician or experienced technician in android software related if the error occurs of USB not recognized then your USB is not working.if a battery is not charged,your USB socket will not proper work and you will fail in this method. if any issues please write your questions in the comment box I will try my best to help you. This method  can be used without any box its done from flash tool it's also available here, and it is important to installing phones driver, you can't flash or upgrade if it is not installed on your computer or laptop it must be installed and also available in this post, here all are linked that tested and working fine just in one try

If you want to repair your device, you can try to repair it by you. You have to charge your battery with any charger and charged it by 94%. Your data is very important for you so it is good to do a backup of your data it may consist of your contact details,your important messages, your emails or any other important thing which you feel to be the backup in your device. This backup can be done on another device. we have to do the backup because after a format of your device, all your data will be gone and it will not be recovered. For backup in other devices, you can use another external device like your hard drive, SD card or any other suitable devices. If you are doing by your own. do it at your own risk as we don't take any responsibility if your device is damaged

Requisite for Xiaomi Redmi Note 3

• Xiaomi Redmi Note 3 device with good battery charged, do not try with low battery
• Xiaomi Redmi Note 3 Stock ROM Firmware | Download
• Xiaomi Redmi Note 3 Flash Tool | MiFlashSetup-Beta.zip
• Xiaomi EDL Boot.bat file | Download
• Xiaomi Redmi Note 3 USB Driver (for Flashing) | Download
• Micro USB Cable with good quality
• Computer or Laptop

Procedure Xiaomi Redmi Note 3 :

• Download tested ROM or Flash tool from above link (if link not working then write down comment on below comment box)
• Go to Firmware WinRAR and please rename to .tgz, if is .gz or tar
• Extract to desktop both WinRAR (Note : Must your firmware folder in desktop)
• Open C:\XiaoMi\XiaoMiFlash\ and choose XiaoMiFlash.exe file and open it
• Click on Select button and choose Image folder from the desktop copied firmware (see below image)

• Turn off device, Press the Volume Down + Power keys same time for entering Fastboot mode





• Now Connect device and update driver go to My computer, Properties, Device Manager, Update driver from above link's
• Open xiomi_edl_boot folder and choose xiomi_edl_boot.bat file and wait until process
• Now click on Refresh button in XiaoMiFlash Tool, after you can see COM:10 or other on flash tool
• Tick on clean all and lock (Note : if device cloud lock then you can use this option) otherwise choose another option
• Click on Flash button and wait until finished the process, do not try to unplug while device in flashing mode
• Congratulation you are done