This is simple way for many type issues solution for Lava Flair Z1 device if you have device and and problems any software related just following this method just one try and success because tested by me before use first read all content of below needed for that and after following step by step let's ho how to flash Lava Flair Z1 with flash tool ?
This flash file is tested by me and it is working very well without any error, you can use this flash file when your device you can use this guide when your device in hang on logo, restarting, auto turn on internet connection, auto turn on WiFi connection, auto apk installing, auto gone balance, pattern lock, screen lock etc these type issues you can use this way etc. This is used with out any tool and box.and also free for all who has knowledge about software in mobiles.for flashing file it is most important to first check your micro USB cable. if it is not good, you can not flash it. and the another one is to check your device battery. it should be not be low, it can stop your device between flash. before you flash it is necessary to save your data like contacts, photos, videos and other important things.
Lava Flair Z1 you can easily solve any problem with this method if you are fresher technician or experienced technician in android software related, if the error occurs of USB not recognized than your USB is not working.if battery is not charged,your USB socket will not proper work and you will fail in this method. if any issues please write your questions in the comment box i will try my best to help you.
This method can be use without any box its done from flash tool its also available here, and it is important to installed phones driver, you can't flash or upgrade if it is not installed in your computer or laptop it must be installed and also available in this post, here all are linked that tested and working fine just in one try
If you want to repair your device, you can try to repair it by you. You have to charge your battery with any charger and charged it by 80%. Your data is very important for you so it is good to do a backup of your data it may consist like your contact details,your important messages, your emails or any other important thing which you feel to be the backup in your device. This backup can be done on another device. we have to do the backup because after a format of your device, all your data will be gone and it will not be recovered. For backup in other devices you can use other external device like your hard drive, SD card or any other suitable devices. If you are doing by your own. do it at your own risk as we don't take any responsibility if your device is damaged
This flash file is tested by me and it is working very well without any error, you can use this flash file when your device you can use this guide when your device in hang on logo, restarting, auto turn on internet connection, auto turn on WiFi connection, auto apk installing, auto gone balance, pattern lock, screen lock etc these type issues you can use this way etc. This is used with out any tool and box.and also free for all who has knowledge about software in mobiles.for flashing file it is most important to first check your micro USB cable. if it is not good, you can not flash it. and the another one is to check your device battery. it should be not be low, it can stop your device between flash. before you flash it is necessary to save your data like contacts, photos, videos and other important things.
Lava Flair Z1 you can easily solve any problem with this method if you are fresher technician or experienced technician in android software related, if the error occurs of USB not recognized than your USB is not working.if battery is not charged,your USB socket will not proper work and you will fail in this method. if any issues please write your questions in the comment box i will try my best to help you.
This method can be use without any box its done from flash tool its also available here, and it is important to installed phones driver, you can't flash or upgrade if it is not installed in your computer or laptop it must be installed and also available in this post, here all are linked that tested and working fine just in one try
If you want to repair your device, you can try to repair it by you. You have to charge your battery with any charger and charged it by 80%. Your data is very important for you so it is good to do a backup of your data it may consist like your contact details,your important messages, your emails or any other important thing which you feel to be the backup in your device. This backup can be done on another device. we have to do the backup because after a format of your device, all your data will be gone and it will not be recovered. For backup in other devices you can use other external device like your hard drive, SD card or any other suitable devices. If you are doing by your own. do it at your own risk as we don't take any responsibility if your device is damaged
Required for Lava Flair Z1
- Lava Flair Z1 device with good battery charged, do not try with low battery
- Lava Flair Z1 Stock ROM Firmware (Flash File) | Lava_Z1_S806L | Mirror
- Lava Flair Z1 Flash Tool | Download
- Lava Flair Z1 USB (Flashing) Driver | Download
- Micro USB Cable with good quality
- Computer or Laptop
Procedure for Lava Flair Z1
- Install WinZip software in your Computer or Laptop, already installed ignore it
- Install USB Driver from the above link's, already installed ignore it also
- Download tested ROM or Flash Tool from the above link, if link not working or broke just leave your comment on below comment box i will soon fix it if possible
- Extract all are files from the WinZip to Desktop or as you like path
- Open SPD Upgrade Tool vR2.9.9015 folder and choose UpgradeDownload.exe file and open it
- Click on Load Packet (Firmware) button and choose zsw898_lava.pac file from the Lava_Z1_S806L folder
- Now click on Start Downloading button and Press and hold Volume Down button and Insert USB Cable
- Wait until driver installing, if installed then downloading start automatically
- Wait until finished the process, do not unplug while device in flashing mode
- Congratulation you are done
Lava Flair Z1 Flash done Screenshot:
Lava Flair Z1 Flash done video:
my device couldn't recognize on SPD flash tool... what to do..?
ReplyDeleteWhich use spd tool version ?
Deletewhile connecting usb cable on the device , it automatically goes into charge mode... ( even if i pressing volume down key while connecting )
ReplyDeleteFollowing this step 1. Check Volume key 2. try to change USB Cable :)
DeleteI found the error. You haven't installed complete drivers. You should install All SPD drivers, latest USB drivers and flash tool mtk drivers. Then only you can install. Remember you should also turn disable driver signature. Learn from YouTube videos. All SPD drivers should be installed manually for each file. This was my final step then only it worked.
DeleteCongratulation
DeleteIm unable to do that volume down and hold thing there is nothing happening after pressing it . it just gets charging
ReplyDeleteAny listen sound when you try to connect phone ?
DeleteYes I listen sound but no action pls give me the solution
DeleteInstall this driver here, and follow this guide here
Deleteim getting an error
ReplyDeleteFailed:use cancel
Use two tool and load file in both tool first try to flash one tool when comes any error then click download button in second tool
DeleteUsb device not recogonised error after flash stuck in boot loader
ReplyDeleteUSB no recognized means 1. battery low issue 2. USB socket issue 3. USB Cable issue
DeleteWhen i try to flash my phone it shows_BKF_NV_W FAILED
ReplyDeleteWhat should i do plz tell me
Change Flash tool
Delete