-->
Friday, June 10, 2016

Karbonn A52 Flash or Upgrade done with Flash tool (tested)

Posted by
Friday, June 10, 2016
Sponsored Links
All your data will be gone and it will not be recovered. For backup in other devices you can use other external device like your hard drive, sd card or any other suitable devices. Karbonn A52 in many type problems you can done with this guide and its very simple to use just carefully following, before use check device in hardware first because some time after flash device not done so means hardware issue like shorting if device not detect with computer or laptop so check USB line into device without connect can't flashing, check also micro USB cable its working well and don't use low quality cable cause few models connected, computer or laptop USB port also working well and in the laptop must be installed driver this is impotent for software related issues. You have to charge your battery with any charger, Your data is very important for you so it is good to do a backup of your data it may consist like your contact details, your important messages, your emails or any other important thing which you feel to be the backup in your device. This backup can be done on another device. we have to do the backup because after a format of your device,

About Stock ROM Firmware:
This flash file tested by me without any error working well,  you can use this flash file when your device hangs on logo problem, restarting problem, security lock problem, password lock problem, pattern lock problem etc software related problem and you can use this tutorial without any box and this is free for all who know about software in mobile, impotent for flashing first must check your micro USB cable if not good then you can't flash it so check micro USB cable second check your device battery that is impotent for flashing if your device battery low so stop your device between flash so this is impotent for flash, before you flash save your data like contact, photos, videos etc because this is factory flash file so you can't save after full flash so must remember all are impotent notes.

Note : If you are doing by your own.do it at your own risk as we don't take any responsibility if your device is damaged

Required for Karbonn A52:

  • Karbonn A52 handset with good battery charged up to 80%, and do not try with low battery
  • Karbonn A52 Stock ROM Firmware | Download here
  • Karbonn A52 Flash tool | Download here
  • Karbonn A52 USB (Flashing) Driver | Download here
  • Good Quality Micro USB Cable
  • Computer or Laptop

Method for Karbonn A52:

  • Download above required link, if link dead or broke just leave your comment on below comment box
  • UnZip all files from the WinZip, here must installed WinZip or WinRAR software in your computer or laptop
  • Open SP Flash tool and choose flash_tool.exe file and open it
  • Click on Scatter-loading button and choose MT6572_Android_scatter.txt file and click OK button
  • Turn off device if turn on, Click on Download button and Just Insert USB Cable into device
  • Wait until Driver installing, if already driver installed in your computer or laptop then download starting automatically
  • If device is dead not detect with SP flash tool so Try with Volume Up button and Insert USB Cable
  • Wait until Finished process, do not try unplug while device in flashing mode
  • I hope you are done, Congratulation
Karbonn A52 Flash done with Flash tool Screenshot:
 
Sponsored Links

No comments:

Post a Comment

Write Your Problem in the Below Comment Box