How to Flash Lenovo S850 Flash done with SP Flash tool ? OR FIX DL Mode (tested)

Here big solution for Lenovo S850 which first of Upgrade or Flashing second of FIX DL Mode, phone when i flash in problem is just stuck logo on lenovo not ahead and after flash one new issue on display of DL Mode not ahead just stuck on logo so here both solution, this is for everyone new fresher also use this guide cause here write so simple method step by step but before use read all are method and also prepare to need for solution, also take backup all data from internet storage like contacts, photos, videos, notes, email etc this is impotent to customer, if data in SD Card so don't worry it safe. Before starting process check of micro usb cable it working well or not connect or not, phone USB socket, stock ROM its corrupted or not, Flash tool, Installed USB driver in your Computer or Laptop ?, these all are step impotent for that.

This Stock ROM tested by me without any error, you can use when your device in Hang on Logo, Restarting, Pattern Lock, Screen Lock, and you can do these problem without any box its free for everyone who working in software related, also check battery must be charged without charged don't try now let's go how to mention issue solve using this method ? see below

Prerequisites to Upgrade, Flash or Fix DL Mode

• Lenovo S850 phone with good battery charged up to 80%, do not try with low battery
• Lenovo S850 Stock ROM Firmware | Download here
• Lenovo S850 Flash tool | Download here
• Lenovo S850 USB Driver | Download here
• Miracle box
• Computer or Laptop

Procedure to Upgrade, Flash or Fix DL Mode

• Unzip Stock ROM, Flash tool, USB Driver and Install to your computer or laptop for Unzip must be installed WinZip software in computer or laptop
• Turn off device if on condition and check battery properly charged or not
• Open SP Flash tool folder and choose flash_tool.exe file and open it
• Click on Scatter-loading button and choose MT6582_Android_scatter.txt file from the Firmware folder
• Again click on Download button and Simple Insert USB cable to Device and wait until driver install automatically if not auto just doing manual update from above link's driver
• If device not detect with Computer or Laptop just Press and hold Volume Up button and Insert usb cable
• After connected device starting flash, wait until full process and remember do not try to unplug while device in flash mode
• After Flash done, Unplug device and take out battery and insert battery and try to Turn on device if device started its ok otherwise any error on the display like DL Mode turn off device
• Open Miracle box, Jump to Extra option and choose Fix DL Mode
• Choose Boot : 8th Boot(MT65xx & MT67XX/8127)
• Tick on USBCable option and click on Start Button
• Just Insert USB cable if not detect device, Press and hold Volume Up button and wait until finished process
• I hope you are done, Congratulation