Intex Aqua I5 mini Flash done with SP Flash tool (tested)

In this device problem of auto data connection start, wifi automatically start, hidden application automatically install, auto balance gone so try first of intex aqua i5 mini reset or hard reset but same issue not solve this problem then i decide to flash device when i flashed device with below link firmware or tool so result problem solved all type issue but not only use this tutorial above mention problem but any try software related issue in this device then you can use this tutorial but remember first carefully all read tutorial after step by step following.

This flash file tested by me without any error working well,  you can use this flash file when your device hang on logo problem, restarting problem, security lock problem, password lock problem, pattern lock problem etc software related problem and you can use this tutorial without any box and this is free for all who know about software in mobile, impotent for flashing first must check your micro usb cable if not good then you can't flash it so check micro usb cable second check your device battery that is impotent for flashing if your device battery low so stop your device between flash so this is impotent for flash, before you flash save your data like contact, photos, videos etc because this is factory flash file so you can't save after full flash so must remember all are impotent notes.

Download Link

Intex Aqua I5 mini Firmware download here | Mirror

SP_Flash_Tool_v5.1343.01 Flash tool download here

• Intex Aqua I5 mini device with good battery charged
• Intex Aqau I5 mini tested firmware or flash tool (link are above)
• Micro usb cable (with good quality)
• Computer or Laptop

• Download tested firmware from above link (if link not working then just leave your comment on below comment box)
• Extract both winrar file to desktop or as you like path (must installed winrar software in your computer or laptop)
• Open SP_Flash_Tool_v5.1343.01 folder and choose flash_tool.exe file and open it
• Click on Scatter-loading button and choose MT6582_Android_scatter.txt file from firmware folder
• Now click on Download button
• Press and hold Volume Up button and insert usb cable (device key, device USB socket or micro USB cable must working well)
• Wait until driver install, if driver installed in your computer or laptop then downloading automatically start into device
• Wait until full install (do not disconnect device while device in flashing mode)
• Congratulation you are done from many software issue

Intex Aqua I5 mini Flash done with SP Flash tool screenshot:

Intex Aqua I5 mini Flash done with SP Flash tool video