Flashing your HTC Desire 326G Dual SIM can help you fix software issues, boot loops, or unresponsive device problems. In this guide, we will walk you through the complete process of flashing your device using the Spreadtrum Upgrade Tool V1.01.
Requirements for Flashing
Before you start, ensure you have the following:
- HTC Desire 326G Dual SIM with a good battery charge (at least 50%)
- HTC Desire 326G Dual SIM tested firmware
- HTC Desire 326G Dual SPD USB Driver
- Spreadtrum Upgrade Tool V1.01 (HTC Flash Tool)
- A Micro USB cable (working properly)
- A computer or laptop (Windows OS recommended)
Step-by-Step Flashing Procedure
Follow these steps carefully to flash your HTC Desire 326G Dual SIM:
Step 1: Download Required Files
- Download the tested firmware and Spreadtrum Upgrade Tool V1.01.
- If the download link is not working, leave a comment in the comment box below.
Step 2: Extract the Files
- Ensure that WinRAR or any other extraction tool is installed on your computer.
- Extract both the firmware and the flash tool to your desktop or any location of your choice.
Step 3: Open Spreadtrum Upgrade Tool
- Navigate to the HTC Spreadtrum Upgrade Tool V1.01 folder.
- Locate and open the file Spreadtrum_UpgradeDownload_P.exe.
Step 4: Load the Firmware File
- Click on the Firmware button within the tool.
- Select the 2PNTIMG_V01A_DUG... .pac file from the extracted firmware folder.
Step 5: Start Flashing Process
- Click on the Download button in the tool.
Step 6: Connect Your Device
- Press and hold the Volume Down key on your HTC Desire 326G.
- While holding the button, insert the Micro USB cable to connect the device to the computer.
- Ensure the USB cable and device buttons are functioning properly.
Step 7: Wait for Driver Installation
- Once connected, wait for the drivers to install automatically.
- If the drivers are installed successfully, the flashing process will begin automatically.
Step 8: Wait for the Process to Complete
- Do not disconnect the device while flashing.
- The process may take a few minutes to complete.
Step 9: Flashing Completed
- Once the flashing process is successfully completed, you will see a pass message.
- Congratulations! Your HTC Desire 326G Dual SIM is now flashed and ready to use.
Final Words
If you followed the steps correctly, your HTC Desire 326G should now be flashed successfully. If you encounter any issues, ensure that:
- Your USB cable is working properly.
- The firmware file is correct and not corrupted.
- The drivers are installed properly on your computer.
If you still face issues, drop a comment below, and we will try to assist you as soon as possible. Happy flashing!
HTC Desire 326G dual sim flash done with flash tool screenshot:
HTC Desire 326G dual sim flash done with flash tool video:
did it work?
ReplyDeleteYes this is tested and in this site mostly post tested :) and working well
DeleteWhy i am press and hold volume down key, this is not work :(
DeleteAny listen sound when you press boot key ?
Deletedid you install any driver? the spreadtrum tool cant see the device
ReplyDeleteDownload HTC Desire 326G Dual Sim Driver HERE
Deleteit flashed successfully... thanks to gsmxda
DeleteMy Pleasure :) thank for join our site :)
Deletethunks dear
ReplyDeleteYour Welcome and thanks for comment here
Deletebro!!its giving error bkf_nv_data_w
ReplyDeleteBefore what happen in device ? condition live or dead ?
DeleteNot working tested firmware and tool
ReplyDeleteGive me issue of not success by you
DeleteNot working
ReplyDeleteGive me details when you use this method and not success any comes error or other
Deletei installed both firmware and flash tool. But my laptop is not detecting the mobile. when am connected mobile to usb port no response in the laptop. I installed usb drivers also. In the usb drivers getting error in Spreadturm_drivers/X64/DPInst.exe............Error is "The device driver installation Wizard was unable to find any drivers designed for yout machine. Check with vendor or your site administrator to ensure you have the correct program"
ReplyDeleteCheck device USB socket, i think this is hardware issue not working your device usb socket
DeleteIf error when you try to installed driver, use 32bit drivre
DeleteNo Hardware issue. Everything good. But DPInst is showing same error and SCI Android USB 2 Serial is not digitally signed driver. Error is update the digitally signed driver.
DeleteI had flash this device there are no required any signed driver, just i update driver it's flash was success, must driver update to manual from the device manager
DeleteMY laptop all ports are working fine. And when am connected mobile its detecting as COM6 but its in yellow colour troubleshoot mode and at that time no response in the specturm upgrade tool. And MY mobile when am pressing VOLUME UP+ POWER BUTTON its showing fastboot mode but after no response for any key. And VOLUME DOWN+ POWER BUTTON completely no response in the mobile. What is the problem
ReplyDeleteWhich windows installed in your laptop ?
DeleteToday i tried with Windows 7 Ultimate 32bit. Now the mobile is detected in spectrum upgrade tool. But when they starts downloading after 3 seconds its getting error like "UART SEND ERROR".
ReplyDeleteTry to another Computer or Laptop
DeleteI WWANT CUSTOM LOLLIPOP ROM FOR HTC DESIRE 326G
ReplyDeleteUse this method here
Deletethank gsmxda team verry good work
ReplyDeleteMy Pleasure bro.
DeleteFirmware link not working .please update new working link.
ReplyDeleteLink has been updated
DeleteThe spreturm can't find my phone
ReplyDeleteNo need to find spd you have same model of above mention then try to flash this is tested
DeleteI installed drivers and tried but the tool doesn't detect my device
Deletewhich use windows ? go to device manager there see check Port (COM & LPT) there make spd driver like SCI ?
Deletemy desire 326g can't open recovery mode....and my phone has bricked....can i flash it by using these steps....
ReplyDeleteYes you can use these because that tested by me Note: If in your device Hardware issue then don't try
Deletefirmware and flash link are not working
ReplyDeleteSorry for late reply Link has been updated
DeleteFlash tool link is gone. Please update the link.
ReplyDeleteSorry for late reply link has been updated :)
DeleteI pause download and want to resume but idm is wanting password and username
ReplyDeleteDownload without IDM
DeleteThank you
ReplyDeleteMy Pleasure and thanks for comment here
Deletewindows 10 support
ReplyDeleteYes working on Windows 10 just install driver of proper
Deletewhich android version??
ReplyDeleteDevice driver software wasn't successfully installed
ReplyDeleteSPRD COM Enumerator. Faild.
What can I do?
It's showing Driver software is not installed.
ReplyDeleteDid you first install SPD Driver ? if not then first do it after reboot your PC and try again
DeleteHello bro my mobile htc d326g dual sim and cpu spd77xx my laptop all fine i try to flashing but system file uploading 75%send error flashing failed pls hellp me your thanks lellping
ReplyDeletemay be charging issue make sure charge full battery and try again
Delete