Micromax A106 Unite 2 Flash done with flash tool

Must Read:

This flash file tested by me without any error working well, you can use this flash file when your device hang on logo problem, restarting problem, security lock problem, password lock problem, pattern lock problem etc software related problem and you can use this tutorial without any box and this is free for all who know about software in mobile, impotent for flashing first must check your micro usb cable if not good then you can't flash it so check micro usb cable second check your device battery that is impotent for flashing if your device battery low so stop your device between flash so this is impotent for flash, before you flash save your data like contact, photos, videos etc because this is factory flash file so you can't save after full flash so must remember all are impotent notes.

Download Link

Micromax A106 Unite 2 Firmware Download
A106_V1_14.05.14_S4700BP_MP_MMX_IN_10
A106_V2_06.06.14_S4700BP_MP_MMX_IN_10 - Version 8GB+1GB
A106_V3_04.08.14_New_SW_14338
A106_V4_13.03.15_SW_V10_HW_V1.1_04032015 - Lollipop 8GB+1GB
A106_V5_26-08-2015
Mirror

SP_Flash_Tool_v5.1343.01 Flash tool Download here

Required for flash:

Micromax A106 Unite 2 device with good battery charged (do not flash with low battery)
Micromax A106 Unite 2 tested firmware
SP_Flash_Tool_v5.1343.01 Flash tool
Micro usb cable
Computer or Laptop

Procedure:

Take tested firmware or flash tool from above link (if link not working so just write down comment on below comment box)
Extract to desktop or as you like path (must be installed winrar in your computer or laptop)
Open SP_Flash_Tool_v5.1343.01 folder and choose flash_tool.exe file and open it
Click on Scatter-loading button and choose MT6582_Android_scatter.txt file from S4700BP_MP_MMX_IN_10_new_flash folder
Click on Download button
Press and hold Volume Up button and insert usb cable (must be working well micro usb cable or device key)
Wait until install driver, if driver installed in your computer or laptop then downloading automatically starting in your device
Wait until full downloading firmware (do not unplug while run flashing)
You are done