Intex Aqua R3 Flash done with RDA flash tool

This flash file tested by me without any error working well,  you can use this flash file when your device hang on logo problem, restarting problem, security lock problem, password lock problem, pattern lock problem etc software related problem and you can use this tutorial without any box and this is free for all who know about software in mobile, impotent for flashing first must check your micro USB cable if not good then you can't flash it so check micro USB cable second check your device battery that is impotent for flashing if your device battery low so stop your device between flash so this is impotent for flash, before you flash save your data like contact, photos, videos etc because this is factory flash file so you can't save after full flash so must remember all are impotent notes.

• Intex Aqua R3 Plus Flash done with RDA Flash Tool

Download Link

Intex Aqua R3 Firmware or Flash tool download here

Required for flash:

• Intex Aqua R3 device with good battery charged (do not try with low battery)
• Intex Aqua R3 tested firmware (R635B_Intex_R3_V11_Indian_service_total)
• RDA Flash tool
• Micro USB cable
• Computer or Laptop

Procedure:

• Download firmware or flash tool from above link (if link not working just write down comment on below comment box)
• Extract to both file from winrar to desktop or as you like path
• Open iedownload_eng from RDA Flash tool
• Click on Option button (in Function option)

• Go to tab Download Setting and Mark to : AutoSave Calibration or Format All option

• Go to tab IMAGE Setting option click on Browse button and choose R635B_Intex_R3_V11_Indian_service_total.bin file from R635B_Intex_R3_V11_Indian_service_total firmware folder and click on Save button

• Now Click on Download button
• Press and hold Power + Volume up button and insert usb cable
• Wait until driver install, if driver installed in your computer then downloading automatically
• If downloading not start when take driver after so install driver manual from smartphone-usb-driver-dev-v1.2-signed folder this folder in RAD Flash tool.
• Wait until full install (do not unplug device)
• You are done

Intex Aqua R3 Flash done with RDA flash tool screenshot: