-->
Saturday, November 21, 2015

HTC Desire 526g+ MT6592 Stock Firmware + Guide

Posted by
Saturday, November 21, 2015
Sponsored Links
HTC Desire 526g+ MT6592 Stock Firmware 

The HTC Desire 526G+ MT6592 flash file has been tested by me and is working perfectly without any errors. You can use this flash file to resolve various issues, including:

  • Virus removal
  • Pattern lock, phone lock, SIM lock, PIN lock, and screen lock removal
  • Hard reset, formatting, and factory reset
  • Firmware updates and software flashing
  • Fixing devices stuck on the logo (boot loop issues)
  • Resolving "Unfortunately, the app has stopped" errors
  • Auto-turn on issues (WiFi, mobile data, or app installations)

This method does not require any tools or flashing boxes and is completely free for those with knowledge of mobile software.

Important Considerations Before Flashing:

  1. Check the Micro USB cable: Ensure that the cable is in good condition, as a faulty cable may interrupt the flashing process.
  2. Battery Level: The device battery should be sufficiently charged (preferably above 50%) to prevent the phone from shutting down during flashing.
  3. Backup Your Data: Before flashing, make sure to back up all important data, including contacts, photos, videos, and other files, as the process will erase everything.

HTC Desire 526G+ MT6592 Repair Guide

If you want to repair your HTC Desire 526G+ MT6592 yourself, follow these steps:

  1. Charge the Battery: Ensure the battery is charged to at least 95% using any compatible charger.
  2. Backup Important Data: Since formatting will erase everything, create a backup of your contacts, messages, emails, and other essential files. You can store them on an SD card, external hard drive, or another device.
  3. Proceed with Caution: If you are performing the repair yourself, do so at your own risk. We are not responsible for any potential damage to the device during the process.

Build: 1.05.720.1 Asia WWE


SD Card Flash File: here

Procedure via Recovery:
* Copy sd flash file to sdcard Boot into recovery mode update the zip.

Procedure via adb sideload:

* Copy sdcard file to adb folder rename the file as rom
* In recovery mode select update via adb
* Connect yur device nd run below dvn cmmd to flash yur device

adb sideload rom.zip

Procedure via Fastboot:

* Copy system-signed.img,userdata-sign & boot-signed-img files to adb
fastboot Driver folder nd run belw gvn cmmds.

fastboot flash system system-sign.img
fastboot flash boot boot-sign.img
fastboot flash userdata userdata-sign.img

Procedure via Spflash tool:

* Extract spflash tool file
* Load scatter file
* Press Download Hold both vol keys nd connect vit usb

Credit to Mr.: jamesjerss
Sponsored Links
Labels: ,

61 comments:

  1. mobile repairSunday, December 6, 2015 at 12:51:00 PM GMT+5:30

    need password

    ReplyDelete
    Replies
    1. GSM HelpfulSunday, December 6, 2015 at 3:40:00 PM GMT+5:30

      Which one password brother ? there no any password for access link :)

      Delete
    2. ansSaturday, September 3, 2016 at 6:24:00 AM GMT+5:30

      Hello I have a htc desire 526g mt6582 died while flashing watched the video for james but the files are loaded on Mega been deleted Please download three files on the link to other Web sites, and send me a link ... I will send you a video link, and if have a Facebook or whatsapp Send me your number and you Thanks
      https://youtu.be/97a-t2sWx7w

      Delete
    3. GSM HelpfulSaturday, September 3, 2016 at 11:05:00 PM GMT+5:30

      Wait until new file updated :)

      Delete
    4. GSM HelpfulSaturday, September 3, 2016 at 11:07:00 PM GMT+5:30

      and here success flash done guide here

      Delete
  2. UnknownSunday, January 10, 2016 at 6:58:00 PM GMT+5:30

    in sp flash tool should we have to select firmware upgrade??

    ReplyDelete
    Replies
    1. GSM HelpfulMonday, January 11, 2016 at 1:49:00 PM GMT+5:30

      Yes you can use sp flash tool :) just click on scatter-loading button and choose MT6592XXXX.txt file :)

      Delete
    2. AdnanWednesday, January 13, 2016 at 7:40:00 PM GMT+5:30

      My android is likely dead.it shows 'no command'.I cannot update any zip file from sd card.whenever i try this it says it needs cota upgrade.what is cota upgrade?? what should I do??

      Delete
    3. GSM HelpfulThursday, January 14, 2016 at 9:55:00 AM GMT+5:30

      If your device is dead :) then download sp flash tool or correct firmware then flash it :)

      Delete
  3. AnonymousWednesday, January 20, 2016 at 11:31:00 AM GMT+5:30

    I pressed the download botton , and den connected my phone . first a red bar say 100 percent , n den a purple bar. After dat i am getting an error code 4008.. Please help me out .

    ReplyDelete
    Replies
    1. GSM HelpfulWednesday, January 20, 2016 at 11:40:00 AM GMT+5:30

      First that are use own risk :) because not yet flash this device so :) use different flash tool :)

      Delete
    2. AnonymousWednesday, January 20, 2016 at 12:28:00 PM GMT+5:30

      I am using the latest version . v5.1532

      Delete
    3. GSM HelpfulWednesday, January 20, 2016 at 2:18:00 PM GMT+5:30

      use this Tool

      Delete
    4. AnonymousSunday, January 24, 2016 at 3:13:00 PM GMT+5:30

      After downloading about 50%, error 4008 appears.!! What to do.? Please help..!

      Delete
    5. GSM HelpfulMonday, January 25, 2016 at 9:29:00 AM GMT+5:30

      must charge battery after try to flash :)

      Delete
  4. jasumanWednesday, February 10, 2016 at 9:46:00 AM GMT+5:30

    where is password

    ReplyDelete
    Replies
    1. GSM HelpfulWednesday, February 10, 2016 at 9:59:00 AM GMT+5:30

      Which one password you asking here no need password for flashing or extracting from winrar :)

      Delete
  5. Tushar banerjeeSunday, March 20, 2016 at 3:57:00 PM GMT+5:30

    My HTC desire 526 g plus function like dead recovery mode and fastboot mode not working now when I power on my device nothing happen and when I going like volume up button with power button nothing happen then when I plug to charge my device light glow and showing HTC logo powered by android after that it switch off then again light up and show HTC logo powered by android written and again repeat as same what will I do ?please help sir.

    ReplyDelete
    Replies
    1. GSM HelpfulMonday, March 21, 2016 at 10:16:00 AM GMT+5:30

      Following last procedure :) which is flash via sp flash tool :)

      Delete
  6. UnknownSunday, April 3, 2016 at 3:51:00 PM GMT+5:30

    my cell is getting hang on htc logo........plz tell me what i do for solve that problem

    ReplyDelete
  7. UnknownThursday, April 21, 2016 at 12:06:00 PM GMT+5:30

    SD Card Flash File is not downloading. What to do? Can you please guide me......

    ReplyDelete
    Replies
    1. GSM HelpfulMonday, April 25, 2016 at 1:35:00 PM GMT+5:30

      Use sp flash tool this is tutorial not this model but it's hint SEE HERE

      Delete
  8. vechanFriday, April 22, 2016 at 7:11:00 PM GMT+5:30

    Hai. Those links are not opening. Please give me another link for download. Please

    ReplyDelete
  9. vechanFriday, April 22, 2016 at 7:12:00 PM GMT+5:30

    Please give another download links if any. My phone is dead ;(

    ReplyDelete
    Replies
    1. GSM HelpfulSunday, April 24, 2016 at 12:49:00 AM GMT+5:30

      If your device dead in software issue then you can live using this tutorial but remember try again using perfect software version and check MT6XXX

      Delete
  10. UnknownThursday, May 5, 2016 at 12:09:00 PM GMT+5:30

    sir i am not understand how to flash adb update via sdcard.i have sdcard file. plz help me sir to step by step.plz plz plz sir

    ReplyDelete
    Replies
    1. GSM HelpfulThursday, May 5, 2016 at 12:12:00 PM GMT+5:30

      I suggest you try with sp flash tool it's easy way for flashing :)

      Delete
  11. UnknownSaturday, May 7, 2016 at 2:30:00 PM GMT+5:30

    hand set dead BROM ERROR:S_SECURITY_SECURE_USB_DL_IMAGE_HASH_FAIL (6047), MSP ERROR CODE :O*00.

    ReplyDelete
    Replies
    1. GSM HelpfulSaturday, May 7, 2016 at 2:56:00 PM GMT+5:30

      Try to Press and hold Volume Up button and insert usb cable

      Delete
  12. UnknownThursday, May 19, 2016 at 3:54:00 PM GMT+5:30

    link not working sar

    ReplyDelete
  13. MarcusThursday, June 9, 2016 at 3:35:00 PM GMT+5:30

    hello during software update my htc 526g dual crashed, i got the logo android with message ERROR. I tried hrd reset with volume up and power button and select recovery to do a hard reset but i got the android logo again saying NO COMMAND. I need your help what should i do now. Can you give me step by step how to make my phone work properly and if possible my email [email protected] you can have a follow up of my progress. Thanks i badly need help.

    ReplyDelete
    Replies
    1. GSM HelpfulFriday, June 10, 2016 at 8:45:00 AM GMT+5:30

      First download stock ROM from the above link and also flash tool, after open flash tool, choose scatter-loading button and select .txt file, last click on download button then press and hold volume up button and insert usb cable and then starting process wait until finished note: must be charged battery up to 90%

      Delete
  14. AnandstoreFriday, June 10, 2016 at 2:08:00 PM GMT+5:30

    sir i want to flashing htc desire 526g+ please help me immediately

    ReplyDelete
  15. UnknownMonday, June 20, 2016 at 1:27:00 AM GMT+5:30

    Thank you sir

    ReplyDelete
  16. UnknownSaturday, July 30, 2016 at 6:39:00 PM GMT+5:30

    thank you

    ReplyDelete
  17. Vishal_202158Friday, September 9, 2016 at 12:44:00 PM GMT+5:30

    After downloading is ok..ie 100% then what to do . The phone does not start...

    ReplyDelete
  18. UnknownWednesday, September 28, 2016 at 6:57:00 PM GMT+5:30

    Sorry gsm I've asked you about this one and not the 616 Rom.... the link of this broken please help

    ReplyDelete
  19. UnknownThursday, October 13, 2016 at 11:07:00 AM GMT+5:30

    msp err

    ReplyDelete
  20. kamleshSunday, October 16, 2016 at 1:58:00 PM GMT+5:30

    thnks nice sd card to update

    ReplyDelete
  21. UnknownThursday, November 17, 2016 at 3:49:00 PM GMT+5:30

    sd file working fine thanks gsm

    ReplyDelete
  22. UnknownFriday, April 28, 2017 at 7:17:00 AM GMT+5:30

    This comment has been removed by the author.

    ReplyDelete
    Replies
    1. GSM HelpfulFriday, April 28, 2017 at 9:48:00 AM GMT+5:30

      Here given two method if you want to flash via sp flash tool then no need to SD Card

      Delete
  23. RyoThursday, May 4, 2017 at 10:49:00 PM GMT+5:30

    my Htc 526G shows no command Error , Crashed during software update.
    How to install new software? I cant Fix it

    ReplyDelete
  24. UnknownFriday, November 17, 2017 at 8:04:00 AM GMT+5:30

    Htc 526g+ flash time error aa raha hai (4032 ) brom error

    ReplyDelete
  25. UnknownTuesday, December 19, 2017 at 10:40:00 AM GMT+5:30

    Htc d616h Bro file kharab hai extract nahi ho rahi bad file aa raha hai

    ReplyDelete

Write Your Problem in the Below Comment Box

Subscribe to: Post Comments (Atom)

Designed and developed by StramaXon