Intex Aqua Marvel Plus Flash done 100% tested by me
Intex Aqua Marvel Plus Model image :
About This Tutorial :
This tutorial tested by me and in that problem of restarting but you can solve problem like pattern lock, Hang on logo, Screen lock, Restart problem etc software related problem but in this tutorial you can't save data because this is factory reset with full flash mobile so care fully use first and also remember must your mobile battery charged and also i put Intex Aqua Marvel Plus Firmware or Tools link so you can download easy and also you can easy solution of above problem from this tutorial here step by step flash tutorial with image tutorial so you can easy following this job and also remember it is better if you use a good company micro usb cable for flash like Nokia, Samsung, etc because some time Micro USB cable be a problem, even when it becomes stop flash then many issue coming in mobile like will to be dead or other problem so carefully use so let's go how to flash Intex Aqua Marvel Plus from Flash tools.
Download Intex Marvel Plus Firmware from HERE
Required for Flashing:
1. Intex Aqua Marvel Plus Mobile with full battery charged
2. Intex Aqua marvel Plus Firmware or Tool with tested
3. Micro USB Cable
4. Computer or Laptop
Procedure:
1. Download Intex Aqua Marvel Plus Firmware or Tools and Extract it to Desktop
2. Open Smart Phone Flash tool
3. Click on "Scatter-loading" button (check right side near to Download Agent button)
4. Choose Scatter file from Download Firmware in Firmware folder
5. If you choose Scatter file then you can see flash like below image
6. Then Click on "Download" Button
7. Attach USB cable in to Computer or Laptop
8. Insert charged Battery in to Device
9. Press and Hold Volume UP Button and Insert USB cable in to Device then starting automatically flash (if starting automatically flash then you can see like blow image)
10. After Full Flash done then you can see like below image
11. You are done from Flashing
12. Disconnect your Device and take out battery from device
13. Again Insert Battery then Turn on
14. You are done
No comments:
Post a Comment
Write Your Problem in the Below Comment Box