Samsung Note 3 N900 Dead boot Repair Solution CPU: Samsung Exynos 5 Octa 5420 100% Tested
Download SDC Images From Below
SM-N900 for Android 4.3
SM-N900 for Android 4.4.2
1 Put your Downloaded SDC Files into: C:\AdvanceBox Turbo Flasher\sd_card\SDC_IMAGE\
2 Create SD Card using SDC Tool from ATF Below image given
SM-N900 for Android 4.3
SM-N900 for Android 4.4.2
1 Put your Downloaded SDC Files into: C:\AdvanceBox Turbo Flasher\sd_card\SDC_IMAGE\
2 Create SD Card using SDC Tool from ATF Below image given
Disassemble phone to expose TP Area.
3. Insert SD Card.
4. Connect Power Supply or Battery.
5. Use TWEEZER TO SHORT that RESISTOR in TP PIX - (BE CAREFUL!! DO NOT DAMAGE RESISTOR!!)
3. Insert SD Card.
4. Connect Power Supply or Battery.
5. Use TWEEZER TO SHORT that RESISTOR in TP PIX - (BE CAREFUL!! DO NOT DAMAGE RESISTOR!!)
PCB 1
6. Use VOLUME DOWN + HOME + POWER Button to make phone enter SD CARD MODE (You can also use JIG).
*** Once phone enter SD CARD MODE, DO NOT SHORT THE RESISTOR ANYMORE!!! ***
You will see something like blow given n the picture:
*** Once phone enter SD CARD MODE, DO NOT SHORT THE RESISTOR ANYMORE!!! ***
You will see something like blow given n the picture:
UP KEY : NORMAL BOOTING
DOWN KEY : DOWNLOAD MODE <------------ Select this
Last Flash with ODIN PIT + BL + AP + CP and CSC Use multi file firmware (Repair firmware Download)
sir, i dont have atf box can i repair dead boot without atf box.plz reply soon...
ReplyDeletethankx
[email protected]
Sorry without box you can't repair
Deletesir can i repair my note 3 dead boot from working note 3 mobile, or can u send me the sdc file which was created by atf box bcz i dont have a atf box.
Deletethankx
[email protected]
Download from the link here
Delete